wiring diagram for toro proline 724-z

Discussion in 'Mechanic and Repair' started by dustermower, Jul 23, 2007.

  1. dustermower

    dustermower LawnSite Member
    Posts: 4

    I have an old proline 724-z that I need a wiring diaram for. How might I obtain one. thanks Dustermower
     
  2. fixer67

    fixer67 LawnSite Silver Member
    Posts: 2,104

    See if you can find the model number. It will most likely be a 5 digit number. It will be on a sticker or plate. Also get the serial number. I know you said it is a 724-z but it will not be listed that way in the IPLs. 724-z is the "product name" not the model number
     
  3. dustermower

    dustermower LawnSite Member
    Posts: 4

    I fianally found the model number. All the plates were gone. The model number is 74140. I needed a wiring diagram.
    Thanks dustermower.
     
  4. dustermower

    dustermower LawnSite Member
    Posts: 4

    I fanally found the number all the plates were gone. It is 74140 thanks
     
  5. Bill Kapaun

    Bill Kapaun LawnSite Senior Member
    Posts: 917

  6. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    They built your model number unit from 93 to 96, All had the below diagram except 93 which was a different part number and only showed the harness with no color codes.

    See if this one looks like yours;


    [​IMG]


    Bill, You posted while I was waiting on my sorry dial-up....:hammerhead:
     
  7. Bill Kapaun

    Bill Kapaun LawnSite Senior Member
    Posts: 917

    But Rob! You posted a PICTURE!:)
     
  8. dustermower

    dustermower LawnSite Member
    Posts: 4

    Thanks Bill this is what I needed. Dustermower
     

Share This Page