1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

work benches in enclosed trailers

Discussion in 'Trucks and Trailers' started by DLCS, Mar 26, 2013.

  1. DLCS

    DLCS LawnSite Platinum Member
    Posts: 4,374

    Anyone got pics of their workbenches in their enclosed trailers? I need to put a bench in mine but kinda torn on how and where to build it. I thought of putting it in the nose (v nose) but also thought of along the driver side and making it collapsable.
     
  2. TruSomethingOrOther

    TruSomethingOrOther LawnSite Member
    Posts: 171

    I threw my bench at the nose. Opted for that location for even weight distro. I still store my 21 and edger and three compartment drawer on the floor underneath the bench. Works great.
     
  3. 911 Home Care

    911 Home Care LawnSite Member
    Posts: 12

    I bought a cabinet with a fold down work bench. It turned out far stronger than I anticipated and I've used it heavily. It provided a good place for storage of my 2 stoke oil, safety equipment and tools I used daily.

    http://www.towrax.com/product.phtml?p=57&cat_key=1

    I'm glad I went with it, as opposed to fabricating or building with wood. It is worth the money in my outfit.

    Daniel
     
  4. Falcon50EX

    Falcon50EX LawnSite Senior Member
    from GA
    Posts: 999

    We used 3/4 angle iron in the nose of the V with one leg in the center front. Then cut a peace of 3/4 ply and lay-ed it in very clean and simple.
     

Share This Page