Wright Stander 36" Blade removal

Discussion in 'Mechanic and Repair' started by Chencho, Oct 24, 2012.

  1. Chencho

    Chencho LawnSite Member
    Posts: 23

    Wright Stander 36"

    To remove the Blades is it reverse thread? I tried with a Pipe and wrench and it didn't budge. Also tried an Impact wrench. I wanted to double check before I really go at it

    What blades are best recommended for mulching?

    Thanks for everyone's input in advanced!
     
  2. BeachysLawn

    BeachysLawn LawnSite Senior Member
    from VA
    Posts: 271

    Not reverse thread, counterclockwise takes them off. As far as mulching, Gators do not work at all. The best I've tried is a low lift regular blade but I have heard that the wavy mulching blades work pretty well.
     
  3. macgyver_GA

    macgyver_GA LawnSite Senior Member
    Posts: 826

    I run the wavies on my 36 WB with a block off plate. Works well on the bermuda I cut.
     
  4. Chencho

    Chencho LawnSite Member
    Posts: 23

    Thanks for the info!
     
  5. Chencho

    Chencho LawnSite Member
    Posts: 23

    I am cutting St.Augustine mostly. I need to it mulch the dead leaves also.
     

Share This Page