1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Wright Stander RH 36"

Discussion in 'Wright Manufacturing, Inc. (Archived)' started by bladerunners, Feb 23, 2009.

  1. bladerunners

    bladerunners LawnSite Member
    from Midwest
    Posts: 47

    Hi, I want to know if the rear drive tire size is 18 X 8.50 X-10 NHS will work on this mower? I couldn't find the size is 18 x 8.00 x -10 nhs. Please let me know thanks
     
  2. WrightCommercial

    WrightCommercial Inactive
    Posts: 526

    bladerunners,

    It should fit the rim the only concern would be how close the tire will be to the hydro lines. We do have a spacer plate that can be used that will give you an additional 1/8" of clearance its part number is 95410008 and the part number is for two plates.

    Best Regards
    Wright Mfg. Service Dept.
     
  3. bladerunners

    bladerunners LawnSite Member
    from Midwest
    Posts: 47

    How much is it ? I couldn't find the part numbers that you gave me #.
     
  4. WrightCommercial

    WrightCommercial Inactive
    Posts: 526

    bladerunners,

    It was recently created and not officially released yet, if you goto your dealer have them call us. The MSRP on the spacer kit is $7.44.

    Best Regards
    Wright Mfg. Service Dept.
     
  5. bladerunners

    bladerunners LawnSite Member
    from Midwest
    Posts: 47

    ok got it then i will contact with the wright dealer. thanks
     

Share This Page