1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

wright stander spacers

Discussion in 'Wright Manufacturing, Inc. (Archived)' started by dogwood1984, Aug 19, 2010.

  1. dogwood1984

    dogwood1984 LawnSite Member
    Posts: 17

    How many 1/4" spacers are on the new wright Standers, they say in the owners manual that it can go from 2 1/2" to 4" on the middle hole settings
  2. WrightCommercial

    WrightCommercial Inactive
    Posts: 526


    Currently the Standers (large frames 48, 52 & 61”) have 3 spacers below and 1 on top. Small frame (36 and 42”) have 4 spacers below, 1 on top and the 32” has 5 below and 1 on top. Moving the blade spacers will give a quick change of cut height but does affect the quality of cut. Changing blade spacers is only recommended for short term projects. We recommend for any long term cutting at other then 3”, to keep the blade spacers in the factory settings and move the wheel motor supports and caster arms up or down.

    Best Regards,
    Wright Mfg
  3. dogwood1984

    dogwood1984 LawnSite Member
    Posts: 17

    Could I replace the 1/16 spacers with another 1/4 spacer on the front caster wheel on the new standers?

Share This Page