Wrightstander RH OCDC

Discussion in 'Lawn Mowing' started by rlmelton, Aug 7, 2007.

  1. rlmelton

    rlmelton LawnSite Member
    Posts: 30

    Does anyone make an OCDC for the Wright Stander Rapid Height? :usflag:
     
  2. Meg-Mo

    Meg-Mo Inactive
    Posts: 1,020

    You need to know deck size to get a good answer. Advance schut systems makes for a lot of mowers.
     
  3. mcduff48

    mcduff48 LawnSite Member
    Posts: 96

    That's correct....Advanced Chute Systems offers one called Guard Dawg that works great on a Stander. That way you don't need to lean over the machine in order to activate the OCDC.
     
  4. rlmelton

    rlmelton LawnSite Member
    Posts: 30

    My Stander is a 48 in Rapid Height.
     
  5. Meg-Mo

    Meg-Mo Inactive
    Posts: 1,020

    The advance chute model ACS6000ULS will fit your mower.
     
  6. mcduff48

    mcduff48 LawnSite Member
    Posts: 96

    If you use that model, you will need to lean over the hot engine every time you close or open it. Try the Guard Dawg( check the web-site ) WWW.Advancedchute systems.com
     

Share This Page