1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

WTT--- MY 7x16 enclosed for 6x12

Discussion in 'Marketplace' started by grassmanak, Jul 13, 2008.

  1. grassmanak

    grassmanak LawnSite Senior Member
    Posts: 792

    Im looking to downsize a little bit, i have a less than 1 year old 7x16 enclosed, it is a carry on trailer. tandam 3500lb axels, i built some shelves up front, Has had 1 coat of herculiner put down on the floor and the walls painted white. Has some bumps in bruiser on the inside aluminum corners, nothing major. couple dents on the outside. Tounge has also been done in herculiner. 2 5/16 IN ball. Also has an electric tounge jack that has been installed on it. Graphics were put on in march or april sometime, they can stay or go whatever you choose.

    What im looking for is a 6x12 enclosed single 3500lb axel. Ramp door, i would really prefer a V nose. Must be in good condition. Color is not really a factor, would prefer black, gray or white.

    [​IMG]
     

Share This Page