Yanmar Question

Discussion in 'Tractors' started by TOOLS1, Jan 17, 2003.

  1. TOOLS1

    TOOLS1 LawnSite Member
    Posts: 7

    My Wife Toolbabe bought me a Yanmar YM3000 tractor for Christmas. I would like to put hydralic hookups on it. So I could use it to power a log spliter and a loader. Dose anyone know how to do this?
    Thanks TOOLS
     
  2. Randy J

    Randy J LawnSite Bronze Member
    Posts: 1,124

    I sure don't, but what a wife! You better hang on to her!

    Randy
     
  3. Currier

    Currier LawnSite Senior Member
    Posts: 564

  4. TOOLS1

    TOOLS1 LawnSite Member
    Posts: 7

    Randy the guys over at Gun Brokers Fourm keep telling me the same thing;)
    Currier I checked out the other site. Pretty neat. Will also post there as soon as I finish regisering.
    TOOLS
     
  5. TOOLS1

    TOOLS1 LawnSite Member
    Posts: 7

    I realy need to start proof reading:rolleyes: :D
    TOOLS
     
  6. kayssupply

    kayssupply LawnSite Member
    Posts: 17

    You cut into the high pressure line from the pump. You can braze fittings to the pipe or get Weatherhead fittings to adapt to a threaded fitting. You use an opencenter valve.
     

Share This Page