Zama carb primer bulb valve body

Discussion in 'Mechanic and Repair' started by Dwayne Oxford, Sep 8, 2011.

  1. Dwayne Oxford

    Dwayne Oxford LawnSite Member
    Posts: 2

    Working on Zama K47 68E carb on Echo SRM-2100 trimmer. Can pump gas thru valve both ways but seems the bulb hasn't enough suck oompah to overcome the li'l spring of the tank intake even with the tank hose off the carb. Any way to remedy or any place to get the valve blocks?
     
  2. dutch1

    dutch1 LawnSite Silver Member
    from Jayhawk
    Posts: 2,231

    I'm assuming it's a C1U as I did locate a K47-68 in the C1U list.

    Here's a link: http://zamacarb.com/prod_lookup_results.cfm

    If this isn't correct, you can go to www.zamacarb.com and search yourself.

    With the proper part number, you should be able to secure parts at any dealer sells Echo.

    Your Echo dealer may also supply parts but Echo numbers may not be similar.
     
    Last edited: Sep 8, 2011
  3. dutch1

    dutch1 LawnSite Silver Member
    from Jayhawk
    Posts: 2,231

  4. Dwayne Oxford

    Dwayne Oxford LawnSite Member
    Posts: 2

    Thanx Dutch.
     

Share This Page