zd 21 wit pro 60 deck

Discussion in 'Lawn Mowing' started by KUBOTADAN, Jul 12, 2004.

  1. KUBOTADAN

    KUBOTADAN LawnSite Member
    Posts: 68

    I have a zd 21 & zd-18. I am having trouble with the 21 leaving a streak from the middle blade. I have made sure the deck is level, using new blades. I had a zd-21 with the old style deck and had no problems. The zd-18 has the old style deck and dows fine. Anyone else with a zd -21 having a problem?
     
  2. rubicacher

    rubicacher LawnSite Member
    Posts: 8

    I have a ZG20 that does that if the grass is to thick or tall. I've been looking for a set of gator's to see if that will help. :cool:
     
  3. FLS

    FLS LawnSite Member
    Posts: 32

    Gators won't help and don't cut as good.Mine does that if grass builds up on the points of the baffles,it usually does it between the middle and right blades.I can clean off the baffles and it's fine.
     
  4. zd21man

    zd21man LawnSite Member
    from nc
    Posts: 21

    I would switch left or right blade with center blade.Also check cup washer its easy to over tighten and flaten washer and letting blade slip
     
  5. specialtylc

    specialtylc LawnSite Bronze Member
    Posts: 1,656

    Are you using the standard lift or the medium lift kubota blades?
     

Share This Page