zspray max castor and wheels/tires for sale

Discussion in 'Pesticide & Herbicide Application' started by grassman177, Sep 4, 2009.

  1. grassman177

    grassman177 LawnSite Fanatic
    Posts: 9,795

    i posted this on the marketplace as well, but you al know we have a zspray max. well two weeks ago or less i bent the right front castor so we had to get replacements. the original are the older style and we had to switch to the new ones. so, we have the left complete castor and wheel/tire plus extra wheel/tire for sale for spare parts etc

    we are asking $75 plus shipping and will clean them off for you as you would expect they are a bit dirty with fert and the like. thanks
     
  2. turf hokie

    turf hokie LawnSite Silver Member
    Posts: 2,744

    If it goes on a 2005 model I'll take it.
    845-494-3781 cell

    Bryan

    edit: I just realized I need to replace the right castor as well, Crap, looks like I will be in the same boat as you.
     
    Last edited: Sep 4, 2009
  3. grassman177

    grassman177 LawnSite Fanatic
    Posts: 9,795

    yes it does and sorry to hear that, thanks though. anyone else!?
     
  4. brizine

    brizine LawnSite Member
    Posts: 140

    How the hell are you bending castors? My zmax would have to fall off the truck going down the road to bend those things. Mine is a 2009, are they different than older models?
     
  5. turf hokie

    turf hokie LawnSite Silver Member
    Posts: 2,744

    It aint easy. Mine got tweaked when I slid off a hill that I should not have been on. At the bottom of the hill was a 10 inch curb into a parking lot. The machine went over the curb at a 45 degree angle and hit the castor just right with a full hopper.

    I actually jumped off the machine, it is the only time I ever came close to putting the z on its side. It was a lesson well learned.
     
  6. br549oicu8

    br549oicu8 LawnSite Bronze Member
    Posts: 1,230

    Ours is a couple of years old so it probably has the older castor design. We decided to upgrade to the new design. Not sure exactly how Grassman bent the one, but all I know is it is upgraded now. The tire/wheel assembly is fine.
    Grassman (my son) uses the max the most out of the guys and has some tough properties so he may have hit a pothole while fully loaded with fert and liquid.

    At any rate, it's a good deal if you check what new ones cost.
     
  7. grassman177

    grassman177 LawnSite Fanatic
    Posts: 9,795

    yes, i thought i said this, but i have several newer seeded large acreage lawns. they have some pretty deep ruts from wash out. i was going along and cought it sideways in one of these ruts. unfortunate, but perhaps preventalbe . the momentum, angle of impact and full load bent this one side. they are quite fine of a castor and if your model is more than 2 yrs old then they have this style already. so, it could be a great extra for cheap for someone that has one of this age! thanks
     
  8. grassman177

    grassman177 LawnSite Fanatic
    Posts: 9,795

    bumpiddy bump
     
  9. grassman177

    grassman177 LawnSite Fanatic
    Posts: 9,795

    bumping again, will get pics if interested, just post or pm me and i can tell you more info. thanks
     
  10. Rayholio

    Rayholio LawnSite Bronze Member
    Posts: 1,461

    mine are bent.. I guess just from bouncing thru potholes in ppls lawns with a full load.. Mine lock up on the spray boom if I try to do a 360 degree turn.. I've got about 2 more days work, then I'm gonna provide a season end report on my Z.. it hasn't done so well..
     

Share This Page