I have this Worldlawn 52" Venom model# WYS52FX730V stand on mower that was left at my house by my bother so i have been using it and the drive belt broke. I have the correct replacement belt and the user manual and the parts manual from the website but there are no instructions for changing the drive belt. Does anyone know where i can find the the instructions for this model or is the process the same as a more popular brand and model stand on mower because there is almost nothing online about these.
![Image]()
Need Help replacing hydro drive belt
Warrenpeas
21 - 32 of 32 Posts
Joined
·
4,714 Posts
Really. @Tiger Small Engine.
@Warrenpeas
![Image]()
Do you understand where it has to run and how to install it ?
.
.
@Warrenpeas
Do you understand where it has to run and how to install it ?
.
.
Joined
·
13 Posts
the red circle is where i use a pry bar to pull the pulley back? does the belt go inside the bar at the green arrow or outside it like i drew it?? let me make sure i got it right.....
![Image]()
Joined
·
4,714 Posts
The red circle is where you use a long ratchet or braker bar with a extension, how long of an extension you will have to figure out.
The square hole should be 1/2"
The belt should go outside of the pin where the green arrow is.
.
The square hole should be 1/2"
The belt should go outside of the pin where the green arrow is.
.
Joined
·
13 Posts
this is what i have been told is the correct route in yellow.
Joined
·
4,714 Posts
That's interesting.......
Anyway, I'm basing the installation of the pump belt off of all the exmarks belts I've replaced. There has alway been a straight run to the one pump. I'll add that I have never needed to remove the anti rotation pin on any of the other machines I've worked on to replace a pump belt.
And the parts break down that FLC2000 posted. Look at the drawing, imagine that the number 9 is where the tensioner is.......
Use your best judgment.
.
![Image]()
Anyway, I'm basing the installation of the pump belt off of all the exmarks belts I've replaced. There has alway been a straight run to the one pump. I'll add that I have never needed to remove the anti rotation pin on any of the other machines I've worked on to replace a pump belt.
And the parts break down that FLC2000 posted. Look at the drawing, imagine that the number 9 is where the tensioner is.......
Use your best judgment.
.
Joined
·
329 Posts
Joined
·
13 Posts
i think you might have been right. this is what the manufacture said today Tim Craver To:You Mon 4/7/2025 7:35 AM The only thing I have available is the image from the parts book. Item 37 which shows the shape of which the belt is routed.
Joined
·
13 Posts
neverminded it looks leek the route in yellow is right. this is what he just sent me.
![Image]()
Joined
·
4,714 Posts
That decal part number comes back to an Encore...
Encore and World lawn are owned by the same Chinese company.
I can only go by what your model number is.
Like I said, use your best judgemant, you are there, not me.....
.
Encore and World lawn are owned by the same Chinese company.
I can only go by what your model number is.
Like I said, use your best judgemant, you are there, not me.....
.
Joined
·
2,360 Posts
That was sure nice of them to send you that.
Joined
·
13 Posts
i got it working. using the route in blue. but i might have it inside out because i have the teeth facing outward not inward. but its working
21 - 32 of 32 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
