Search results

  1. tiger cub

    I have a cub that is about 2 years old. Last year I lost the hydro belt that is cogded and replaced it with the same belt fr5om nape. About 2 weeks later this belt took a dump. I then toke the mower to my xmark dealer and they placed it with a v belt. The mower ran fine for about 9 says months...
  2. Better quick 36

    13 hp Briggs, Mulch kit with Sulky. 5 Hours $1950.00 pick up only.
  3. Pro Slide on a Better 36

    I was wanting to put a pro slide on my Better 36, has anyone done this and how does it work out.
  4. anyone using tilt trailers

  5. Big block engines

  6. 2004 tiger cub florida

    19 horse kaw. 48 inch deck,mulch plate and extra blades. Unit has 413 hours and in very good shape. 3800.00 pm or 352-397-6173
  7. Redi Ramp

    Three years old but never used, was mounted and mower was run into bed. Have no use for it and will let it go for $200.00, will deliver with in 200 miles.
  8. Walk behind weight kit

    I have a 48 inch deck on my hustler walk behind that was in need of your weight kit(46 pounds). The problem being that that front end would always raise upon start or turning. I ordered the kit from my dealer with the understanding the price was 65.00. Upon arrival the kit was 89.00...
  9. Scag cub OCDC

    In need of an ocdc for a cub. Does anyone know of one or where I can purchase one?
  10. Scag mulch blades

    I have a cub with the mulch plate that works just fine. Looks like the blades are low lift and as I said works fine. Called dealer today and parts man said I need Scag mulch blades, at 20.00 a crack plus freight. My question is, what do the rest of you use for blades or do you just discharge...
  11. 23 Kaw

    I have a 23 HP Kaw that has an oil leak. I keep having oil on the filter and around that part of the block. Does any one have any ideas as to the problem. Have checked the oil sender just above , but seams to be ok.
  12. 52 inch deck

    I own a 23/44 super mini Z with a 44 inch deck. I ask my dealer about purchasing a 52 inch deck. There reply was that I would have to buy the 52 inch shell with a new belt an change every thing on my 44 over. Are you telling me that I can not buy a complete 52 inch deck to replace my 44...
  13. Exmark TT 60/23 or stander 61/23

    I am looking to purchase one of these units. Any imput would help a lot.
  14. Super Mini Mulching

    I have a 23 hp/44 deck with the mulch kit with gator blades. I have noticed that when mulching St. Aug grass the deck does a terrible job and drops mulched clippings all over. The tire press is fine, the blades are sharp. Also by friend has a super Z with the 52 inch deck and this unit does...
  15. Walker motor conversion

    I have a walker with a 20 hp Kohler motor. I would like to beplace it with a 19 hp kaw. Has anyone done this and were there ant problems? Walker is a die hard Kohler fan and is no help. I mean only 2 pulleys and four bolts, or am I wrong?
  16. Super Z OCDC

    I am looking for a ocdc for 44" deck, Does anyone have any info as to where I can buy one, or info on making one.
  17. anyone using tilt trailers

    I was thinking of purchasing a tilt trailer. Does anyone have pros and cons of them.
  18. hydro filter

    I purchased a hydro filter from my dealer Sat. The invoice has the right part #, but the filter looks to small. The # on the filter are 0398360z, and 21400e1. Is the correct hydro filter or did they mess up? Also it was not in a box and is white, I have had a few problems with after market...
  19. Tire pressure on bull rider

    I do not know or can not find the tire pressure for my bull rider. It is on a 17 hp, 48 inch walk behind hydro. Any help will work for me. Also this mower is the best.
  20. Big block engines

    How may people have big block engines (360/454) and what are your thoughs on them? Do you think they are needed to pull trailers?

Top