Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 69 Results
  1. Mechanic and Repair
    My current set up is on a Toro 20444 recycler deck with the 59290 recycler bagging kit. I can't find the model number of the Toro I bought originally which those are the parts on the current deck. The mower I originally bought was the Toro personal pace with the GTS 6.0hp by Briggs and Stratton...
  2. Lawn Mowing Equipment
    Hey guys, I’m new here. A little intro - I just recently graduated college with a degree in Healthcare Management but have been running my own landscaping service for the last 5 years on the side. The hospital where I did my internship called me about 2 months ago and told me about a potential...
  3. Lawn Mowing Equipment
    How often do you all change your mower blades? I'm specifically talking about the most used mower.
  4. Lawn Mowing
    Does anyone know of any blades that will for a 54” deck that are larger than a standard high lift. Like a super high lift. 1.5 sail or larger. 18.5” blades 5/8 hole. I have looked everywhere I can find that sells blades with no luck at all.
  5. Lawn Mowing
    Hello, everyone! I have an Exmark Lazer Z E-Series 60 inch mower. I sharpen the blades regularly, always make sure the deck is clean, and keep my machine well maintained. What I have noticed is on certain types of grass, the mower will leave some blades of grass uncut. Has anyone else ever...
  6. Lawn Mowing Equipment
    Hey guys, We currently buy all our blades from my dealer and recently he has put up an online site for selling his mower blades. The best part is that he told me that I could give out a discount code to you guys! The website is: https://mowerblades.com/ And the discount code is Free40TW...
  7. Lawn Mowing Equipment
    Hi All, Looking for replacement blades for my Ferris has become more difficult than I thought. The deck sticker says part # 84001114; which basically doesn't exist. All local and online parts suppliers tell me this part is not available. Louisville tractor parts diagram tells me I need part...
  8. Lawn Mowing
    Hi all. I have a Scag Turf Tiger with a 52” deck. In your experience, do the .25” thick blades out perform the .204” blades enough to warrant the additional cost? Thanks.
  9. Mechanic and Repair
    Happy Fall-Summer to everyone! (The conditions here in Michigan are horrible right now) I think I’ve asked this before, but I figured I’d put the question out again. As long as your mower blades are sharp, with nice corner ends, and not bent: a couple of chips in the blade won’t affect cut...
  10. Mechanic and Repair
    Newbie Post: I have been doing lawn care for several years, mostly on the side. Recently I have started in full-time. I have used a JD X739 in years past but recently purchased 2 Quik Traks. Is there an easy way to change blades on these guys? I'm jacking them up and crawling under to remove...
  11. Lawn Mowing Equipment
    I'm a little frustrated over something and I know if anyone has the advice I'm looking for, you guys do. I have a 2019 Gravely ZT-HD52 that I'm trying to find blades for that don't leave as many un-cut pieces as the OEM blades. I've heard good things about exmark style notched high lift blades...
  12. Lawn Mowing
    Hello, everyone! So, I have a Lazer Z E-Series Exmark 60 inch mower, it has almost 1500 hours on it. I sharpen my blades as much as I am able, there are no issues with any of the spindles, and I constantly scrape the deck to keep it clean. But I noticed towards the end of last season, the...
  13. Lawn Mowing Equipment
    I have been looking all over the internet for a set of mulching blades to fit my snapper pro 125xt 52” mower. Anybody know of a company that makes them or can post a link ? Thanks
  14. Lawn Mowing Equipment
    Hey, everyone! This is my eighth year with my lawn care business. I finally got to sharpening my blades the right way this year, I use a 4 1/2 angle grinder and now I'm able to keep a nice 30 degree angle on the blade. Long story short, I've been told the edge of the blade (the very end) is...
  15. Lawn Mowing Equipment
    I have a 36" worldlawn stand-on. I recently bought some blades to replaces the originals. I looked on the spec sheet for my mower, which said that this mower used 18" blades. I ordered some 18" XHT blades that are meant for a scag. I figured that 18" is 18"...brand or style doesn't really...
  16. Mechanic and Repair
    Hey guys, not sure if this is the right place for this but you guys seem pretty handy, i scored a hustler 52 (i think) super z for dirt cheap, 440 hours. Pretty good shape. I couldnt say no for my petty weekender lawn business, thing is after mowing my last lawn my blades cut out. Can't seem to...
  17. Lawn Mowing Equipment
    Hello All, I’m looking for a little help and figured this was the place to find it. I have a hand-me-down Snapper 21” push mower with the mulching deck. The mower is in good shape and currently has the ninja mulching blade on it. My issue is in cutting, the mulching blade has basically zero...
  18. Homeowner Assistance Forum
    Hey everyone. I just purchased the Z960M this weekend. I am experiencing very poor cut quality on 4”-5” grass. The Mower is leaving behind uncut grass and the spring onions here in NC. On this new machine the standard blades that come with should cut a regular yard. I am cutting regular...
1-18 of 69 Results
Top