Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Mechanic and Repair
    I have a CV740-3111 with a blown head gasket. I'm taking tearing down before I order parts so I can place 1 order for everything I need. Someone put the shroud screws in wrong and pressed into the plastic intake manifold. I've been trying to lookup the intake manifold part. Every site I go...
  2. Lawn Mowing Equipment
    This mower runs great, but I need to start it with starting fluid because the pull start has resistance and I can get it cranking fast enough. Its not the recoil starter, I just replaced it, Its almost like I’m pulling against hydraulic pressure. Any ideas? Thanks Doug
  3. Mechanic and Repair
    I have a well use Kohler Command riding lawnmower. I'm having a problem with keeping it running. It will start and run with the brake applied. As soon as I lift off the brake it dies out. I can't find the safety switch that is attached to the brake in order to bypass it to see if that is...
  4. Lawn Mowing
    The Exmark has sat for a while after running well. It has a Kohler Command 25 that I have replaced 1 head on, a few seals and such in the past 3 years. It ran today for a good 5 minutes idling, went to mow and it made it 20 feet before surging and shutting down. Restarted and idled fine...
  5. Marketplace
    These are for sale by a friend of mine. They are basically "new" engines. They may have been run for testing purposes/factory checked, etc. May or may not have the original box. You can be assured that they have never been on a mower/tractor and been abused. If interested, contact me by e-mail...
1-5 of 5 Results