Search Results for ‘cut quality’

I’m looking at purchasing a Walker with the 36” collection deck. It turns out that the 36” collection deck only comes in reverse rotation. My local rep said that it will not work very well on our souther grasses (mostly Bermuda, Zoysia, & Centipede). Anyone have any experience using a reverse...

I have an Exmark Radius E 44 inch. It is the size that fits well with my business model. I have had it for a year and it has 185 hours on it. I am not overly pleased with the cut quality. The blades are sharp The deck is cleaned out The tire pressure is where it is supposed to be And yet There...

I am planning (if everything goes well this season) to upgrade my whole setup at the end of this year/first of next year. I currently run a x540 54inch garden tractor and love it. I plan on getting a x758 60 inch and have been seriously thinking about getting a zero turn as well just to save...

Hello, everyone! So, I have a Lazer Z E-Series Exmark 60 inch mower, it has almost 1500 hours on it. I sharpen my blades as much as I am able, there are no issues with any of the spindles, and I constantly scrape the deck to keep it clean. But I noticed towards the end of last season, the...

Do Scag High-Lift blades create a better stripe than for example, Gator Blades?

Just got a turf tiger and 36 vride 2. I love the exmarkdealer and have a great great great relationship ship with them and I buys my supplies there also but I specifically wanted those 2 mowers. Now for the third mower it’s between a 52 vride or exmark 52 radius x with a bagger. I live in...

This is such a great video I found on youtube in regards to cut quality!

Hi All. I was looking for some insight on some issues I had with both of my mowers( 52" grandstand and 52" vantage) this season. Both mowers would leave half cut grass next to the right tire and also about 10-12 inches in on from the left side of the mower deck. Tried all the normal procedures...

I’m having, have been for years, cut quality problems on my Deere. Stragglers, mostly under the spindle of each blade. I think. Although I don't see how that an be. 'I'd have assume in between the 3 blades. But it doesn't seem that way walking up to it. And turning always leaves...

Without getting into the details of what type of mower, what type of grass, etc....... I was wondering what are the most common causes of a mower leaving an uncut strip of grass in between the blades? Not necessarily a perfect line of grass, but an area of the cutting swath that clearly is not...

Hey Everyone, So I've had my new HRX for about 3 months now. I mow roughly 4 lawns a week. Total run time is about 4-5 hrs a week. I'm really starting to get frustrated with the cut quality and mulching capability of this mower. Cut quality: I'll start off by saying, i'm not sure if it's the...

I am getting an uneven cut on my 2007 Dixie Chopper; I grew tired of keeping up with a slow leak in a front tire so I upgraded to the 'never flats'; I've checked the rear pressure and up to spec. It seems like the 'lower' cutting blade is the front left (as you are sitting in the seat looking...

Got an old toro 20017 personal pace mulcher I use on a few smaller yards, using the atomic blade, cut quality is OK, but not great. Any thoughts on switching to a high lift or gator blade on that machine?