Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Lawn Mowing Equipment
    This mower runs great, but I need to start it with starting fluid because the pull start has resistance and I can get it cranking fast enough. Its not the recoil starter, I just replaced it, Its almost like I’m pulling against hydraulic pressure. Any ideas? Thanks Doug
  2. Homeowner Assistance Forum
    Just wanting some opinions because these are the three ive narrowed it down to in a search for a mower for my 5 acre fairly flat yard. Originally wanted he Husqvarna, but the same dealer told me i could get more for my money with that particular Dixon(he sells both). Then i sat on the Badboy the...
  3. Mechanic and Repair
    If you have ever tried to adjust the original Dixon cone drive transmission, you may have been mystified like me and searched the internet. You may have come across the service manual named Dixon-Transaxle-Manual.pdf. You may have thought there were pages missing, as did I—at least until this...
  4. Mechanic and Repair
    My Dad has an older Dixon ZTR 308 mower, as of late the mower would stop and stall, after taking the mower to a repair shop, the conclusion is that it would take $700 to fix the mower due to bearings in the drive. So, I'm a bit of neophyte when it comes to lawnmower repair, but is this...
  5. Marketplace
    Only used half the season last year, only 59 hours on it. Still in great condition, no problems and serviced regularly. Only 34" deck so you can use it for commercial jobs where you have to go through gates to reach the back yard. It will save you from having to push mow back yards. Plus...
  6. Lawn Mowing
    I am looking to get a 60" ZTR next year or maybe this year. My first choice is a John Deere, I have owned 3 now and all have worked very well. I have a Z925a right now, 54" deck, 27hp kawi and i am really happy with every part of this mower. Just looking for something bigger, 60" with at least...
  7. Lawn Mowing
    I am selling my John Deere 318 Tractor 50" deck and Snow blower attachment, along with it's accessories. Someone has offered an even trade for the tractor - A Dixon 5502 (760 hours). And offered $400 for my blower, weights and chains. I have a rebuilt motor Onan and the tractor has 1046 hours...
  8. Marketplace
    I'm not geting out of the business, just down-sizing. Here is the run down. * 2004 Nissan Titan king cab SE 4X4, all power options including pedals, ONLY 37,000 MILES!!!!, Rockford Fosgate 6 disk in-dash changer option with factory subwoofers under the seats (it is awesome), Tie down rail...
  9. Mechanic and Repair
    I have a 1997 Dixon 5502. I rebuilt the motor, replaced all the belts, and changed the fluid and filter in the drive system. When you first start off it takes off like a rocket but after you move the handles a couple of times it slows to a crawl and won't go up a hill. The motor is still at high...
  10. Mechanic and Repair
    I have an issue with a 2000 Dixon ZTR4423 (Model DM-42-93997). The engine to deck belt keeps jumping the idler pulley and getting shredded. I have replaced the belt twice now (I ran it for years without having issues until the original belt shredded last fall). All the bearings seem to be...
1-10 of 10 Results
Top