Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 64 Results
  1. Mechanic and Repair
    I need a new engine for my scag hydro walk behind, model number swzt48-15fs The dealer said they could get me the same engine for a little over 2k but I found two different engines that are only around 1k, the current engine is a fs541v-fs19-r I found a fs541v-hs05r, wasn't sure if the last part...
  2. Mechanic and Repair
    Has anyone does an engine swap on the John Deere mowers with an FX921v engine? According to John Deere, the engine is a FX921V-AS10-R which was replaced with FX921V-BS10-R. I can't look up specific engine info because of John Deere's exclusive deal with Kawasaki. Does anyone know the shaft...
  3. Lawn Mowing
    I have a 2000-2001 Toro GTS XL that I use to mow a few lawns, nothing crazy. However aside from 1 weekly, the rest of the lawns are by call only. So usually when I get there the grass is pretty tall. I do have a side discharge for the mower, however it quickly clogs so I'm sticking to mulching...
  4. Mechanic and Repair
    Hi all, I have a 2 year old Cub Cadet 54" RZT - Kawasaki FR691V engine, never had an issue with the engine before now... the crap cutting quality is another story. For whatever reason now while it's running and sitting at idle, the rpms drop and raise to normal then drop and raise and drop and...
  5. Mechanic and Repair
    Hi, I have an old Ferris 61" zero turn (FERRIS 5900612 SERIAL 2000485600) with a propane conversion. Its relatively new to me. It currently has a Kohler CV750-011 30HP which apparently is no longer made. That engine basically needs to be replaced. Question, is there a replacement engine that i...
  6. Mechanic and Repair
    I bought a used Walker MCGHS last year from a local landscape company. It worked fine (but not great) for a season, the I decided to do some extensive maintenance on it for this season. One thing I found that that it has low compression in one of the cylinders on the engine. The machine came...
  7. Mechanic and Repair
    I have a 2014 Toro SS3200 that has always run great, but recently started leaking oil from the OHV. I decided to put a new engine on and whent with a lc1p96f-v-608cc-muf engine which I ordered new on eBay. Engine came in and after some bloody knuckles I got it installed and ran perfect...
  8. Mechanic and Repair
    Hey guys and gals last year I purchased a new Ferris F320Z mower with the 37hp Vanguard engine which the dealer just gushed over. Well fast forward to now and it has been nothing but headaches. So I had an issue about 2 months ago where when I pushed the handles all the way forward it would...
  9. Mechanic and Repair
    Has anyone put the 708cc predator engine on the Toro ss3200? I use the ss3200 for backyards and love the mower size but mine needs a new engine. Would this work?
  10. Mechanic and Repair
    Hello, I'm a one-man operation repairing mainly strimmers (as we call them in the UK). I have a Stihl FS80 with a seized engine and am wondering if an engine from a FS55 would fit? Anyone know? Cheers
  11. Mechanic and Repair
    Hello Thanks in advance I just got a like new hr214 from an estate, I owned a sx for 25 years. The mower appears new but old. The nephew said his uncle bought it new gotta about 5 acres cut, became ill and it was never used again and sat in his shop. Oil changed, gas added and it ran fine. I...
  12. Mechanic and Repair
    Im trying to buy a new motor for my dingo 222 having a problem finding the same motor... On the cover of the motor it say kohler command 25.. It's not a pro. Here the number off the motor Family. SKH624UIG2RA Model. CH20S Spec 64603 Serial 2726116937 I found a ch640 was wondering if that...
  13. Lawn Mowing Equipment
    I have an older vanguard twin (385777-0349-E1) 21HP on my Wright mower. The engine runs rough, and I've narrowed it down to the right cylinder. Whenever running, the engine surges during idle to mid rpms, but usually sounds alright full throttle. I noticed the right spark plug intermittently...
  14. Mechanic and Repair
    Hello all, I'm new to registering but have poached info from lawnsite for a long while. I would you some quick thoughs on a mechanical matter if possible? I'm going to be brief to not drag out to long with the details. I have an LT Rich Z Spray with 16hp Vanguard engine. The problem was with...
  15. Lawn Mowing Equipment
    I will be buying a new mower in the Spring and am looking for a thread that I can quickly turn to for info. Apologies if this is a redundant topic. I have had great experiences with the carb'd Kawasaki 27 & 31 over the past several years and am considering one of those once again but I am also...
  16. Mechanic and Repair
    Hey Y'all! I have a 2009 Troybilt Pony for my home and someone thought they were doing me a favor and changed my blades. In the process-They turned it on its left side and dumped all the oil and gas - they "tried to fix it" but have zero knowlege. long story short i have let it dry out for...
  17. Mechanic and Repair
    this has been happening lately, not a big deal at first until i get busy with something. i had to replace my hydro belt so it was something to do while it cooled off. 480 ish (havent looked in a while) hours on this thing. really doesn't want to start until fully cooled the last couple days...
  18. Mechanic and Repair
    I have a husqvarna PTZ-54 zero turn with a Kawasaki fx730v. The issue only seems to happen after the mower has run a while. If the engine is cold it will fire right up. But after mowing for more than an hour if I turn it off I cannot get it back started. The engine will not even spin so I’m...
  19. Lawn Mowing Equipment
    Hi all, New to the zero turn world, a buddy offered me his 2015 Turf Tiger 61 Velocity deck with 23 HP Kawasaki for $5550. Has approx 400 hours. Clean machine. Friend accepted in the police academy and is liquidating. He did mostly cemetery work. I'm a bit worried of motor size, and whether I...
1-19 of 64 Results
Top