Search Results for ‘exmark’

2021 Exmark Lazer Z X-Series 72" 31hp Kawasaki w/ 1429 hours **Still under 1,500 hour warranty *Flex forks on front castors for smoother ride *Iso-mount suspension seat for less impact on rough terrain *Chute blocker for clippings control *Fully serviced with new deck pulleys...

Toro Turfmaster 30" for sale. It is about 4-5 years old. We have two of these and didn't use this one much last year so we are deciding to sell. Everything works great, no issues, no drips, starts right up, and cuts grass fast. Asking $1750 Call or Text Two19-8six3-4one74

Good morning all, Have an older 2002 Lazer Z with the Kohler Command Pro EFI on it. It appears as if the ECG module (Bosch) has bit the dust - original part number O-261-S03-001 KOHLER 2458423 I'm trying to figure out if there are any alternative modules that could work or be adapted to work...

I must not have checked my lug nuts for a while and a few had gotten loose, causing the rim & tire to come off. Needless to say I'm replacing the rim, lug nuts and hub offset (116-3872). I've removed the rim, cap and hub nut. However I'm having trouble removing the hub offset. Is it just...

Hi Y'all. I'm a site director at a youth camp (grounds maintenance plus extra duties) and i'm having some mower issues. hope you might be able to help me out. I've got a exmark lazer Z 2014 with the Koehler ecv 980 EFI and a 72inch deck. mower has been consistently dying on me after 15ish...

I have a exmark Laser Z - E series When tightening the bolts the manual says to tighten to 55-60 Ft-LB torque. When I use an impact wrench the blade is extremely hard to keep still to tighten the bolt, How do you all ensure you are tightening it to the correct spec/hold the blade inplace?

Hello, I've an eXmark LazerZCT #LCT23BV 600000 Series, with a Briggs 300000 Series motor. It’s around year 2006. Few mows in to the season and the mower dies about 30 minutes in mid-mow out of nowhere. Go to turn back on and not even a click out of the starter or anything else. Battery was near...

Hello Everyone, I have a 98 exmark with the kohler ch25s motor. Last fall I noticed a bad oil leak coming from the breather tube. I replaced all of the necessary parts for that job but in my stupidity I didn't mark the governor in the position it was in before I removed it to do that job. Also...

I have an Exmark Lazer Z 60 Model Number: LZX749EKC606, Serial number: 312627431. Does anyone have a picture of their correctly assembled throttle body, and governor linkages and springs? My idle is very high after an engine rebuild. Is there a TPS relearn on this engine I can do? Thanks in advance.

For sale by owner is a 2020 Exmark Turf Tracer with 36 inch deck. This mower has the dependable Kawasaki engine and hydro gear transmission. The mower only has 115 hours on it and has been meticulously maintained by a local Lawncare shop per the service schedule. This mower is perfect for...

I have an Exmark Lazer Z 60 Model Number: LZX749EKC606, Serial number: 312627431. The battery is not charging. I followed all of the electrical tests on Kohler’s YouTube channel and the stator put out 53 Volts AC and the regulator had over 12. I noticed both of the wires on my diode were broken...

I have a Peco PTO-C Vac system for sale. Unit has less than 300hrs on it and less than 100 on a new gear box. Hopper was destroyed in an accident. Open to offers, thinking it’s worth somewhere around $700.

2018 Z-Spray Intermediate SERIAL# ZS4630-18096. Machine is in very good condition and has been maintained very well. Everything on machine works perfect as it should and is ready to go out and work. All fluids were just changed and all zerk fittings greased. Original owner of this machine. Total...

2016 Z-Spray Intermediate SERIAL# ZS4630-2016-01B. Machine is in very good condition and has been maintained very well. Everything on machine works perfect as it should and is ready to go out and work. All fluids were just changed and all zerk fittings greased. Original owner of this machine...

Stinger Qaud-Aer 3000 Ride On Aerator (Core Aerator). Very nice machine and very well maintained. Total runtime on unit is 243hrs. Original owner. VIN# (QA3000-20046) Everything on machine works perfect. Ready To Go. If you have any question or would like more photos we would be happy to send...

Hey all, Got an exmark vantage 52” stand on ( 2015 ). Recently out of no where I’ve had issues with speed going forward. Reverse speed is normal and no issues, but going forward it’s only moving maybe 4-5mph max where it use to go 11-13mph. Seems after half throttle any more throttle doesn’t...

Hey guys, I’m looking into trading my 2005 Exmark Turf Tracer 48 for a 36. It would have to have the ECS controls and the newer pumps, not the mushroom kind. Let me know what you guys have. I would be willing to add a maximum of 300 if needed. I listed some pictures of the mower below. Only...

I have a nice exmark Turf Tracer 48 walk behind for sale. The motor has recently been rebuilt. Hydros are very responsive. No leaks or issues whatsoever. Spindles are quiet and make no noises or wobble. Mower is ready to work. $2500. I would possibly trade for a Exmark Turf Tracer 36 with cash...

Hi all, I have a 2000 eXmark Lazer Z with a 25hp Kohler that will crank but not run. The mower was working fine and all of sudden while mowing it sputtered, shut down and wouldn't restart. We got it back to the shop and found the fuel pump is still working while cranking over and it had spark...