Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 9 Results
  1. Mechanic and Repair
    Is this normal? Purchased new hedge trimmer from local dealer and leaking a lot of grease on first use. I did not grease it.
  2. Mechanic and Repair
    Hey Guys, This may have been posted before and I apologize in advance. I was trying to grease the caster pivot, as per the manual, but for the life of me the grease plugs will not loosen up to remove. Have you guys ever seen this before? I'm about to the point that I may have to drill them...
  3. Mechanic and Repair
    The manual mentions greasing 3 cutter spindles. I have looked and can’t locate them. The model number is SST61V-25KA. The serial number is K1700152.
  4. Mechanic and Repair
    Hey Guys, What is the difference between white, black, and red grease? I want to maintain my equipment well and could use some advice. I have a Wright Stander and a Scag walk behind. Is there a difference between grease for casters and spindles? How much should I use? ANY advice is...
  5. Lawn Mowing
    I've been having problems with my T282 head getting really hot and melting and welding my speedfeed heads. I've replaced 3 speedfeeds this season on this trimmer from light part time use. The first two, according to the dealer, were my fault because I didnt use the $5 .8 oz Shindaiwa grease...
  6. Mechanic and Repair
    I have a 48" Scag belt drive with the 5 speed Peerless. I was wondering if I have to clean the whole transmission case and put new Bentonite in or if I can just add more to the grease that's already in there and if so, how much?
  7. Heavy Equipment & Tractors
    Six fittings on the undercarraige of my ASV are clean and accesible -- but they aren't taking grease. There is a lot of pressure on my gun and none is going inside the fitting. Is there a tool or procedure for freeing up stuck fittings? thanks!
1-7 of 9 Results