Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Lawn Mowing Equipment
    I have a scag tiger cat with 1350 hours thay had a hydro pump failure. My question is am I correct in that only filtered oil enters the pump and motors? Is it possible for metal shavings from a failure on one side contaminating the other side? So if I find metal shavings from the reservoir, it...
  2. Mechanic and Repair
    I have a Lazer Z CT, that has 185 hours on it. It has the 18hp Kohler Command. After using it for a while, when i go to turn, the left works just fine, but the right will just spin the wheel with no traction at all. I have tried adjusting the pumps to no avail. It happens after about 5 minutes...
  3. Heavy Equipment & Tractors
    Hi all The Center pump on my 2000 John Deere 1600 WAM is leaking. Does anyone know if these can be rebuild? If not does anyone know were I can buy a new/ used one? This is not the pump on the deck, it is the one under the middle of the machine. Dave
  4. Mechanic and Repair
    can anyone show me a diagram on how the drive and pump belt go on a exmark lazer z the belt popped off on me and I dont know the way it goes back on thanks.
  5. Mechanic and Repair
    I have a exmark lazer z my left side was grinding and would go out so I started researching and it seems that the hydro pump was going out. so i rebuilt it replaced some seals and the bearings, i noticed the pistons looked as if they were getting stuck maybe I should order but any way I put...
  6. Mechanic and Repair
    Hello, I need help with a 72" Hustler super Z zero turn hydro pump. It will not go backwards or forward, it blew hose off top of pump going to coolant radiator. Anybody have any suggestions?
  7. Lawn Mowing
    First year in the commercial mowing biz, started out with a older exmark viking and then upgraded to a great dane scamper walk behind with the problematic integrated hydros. This mower is awesome, stripes great and the kawasaki engine on it is simply badass, I’m just scared to death one day one...
  8. Marketplace
    I'm looking for a hydro pump for a toro z master 252, i just replaced the wheel motor but i guess a few metal shavings got into the pump when the wheel motor exploded inside. ive cleaned system and even put a high powered magnet on the filter to make sure no metal shavings went back into the...
1-8 of 8 Results