Search Results for ‘kohler’

I'm looking for a mower to tend to a 7 acre plot that I'm gradually transitioning into a hazelnut and chestnut orchard. It's rough terrain, formerly a hay field, on something of a slope, although not a crazy aggressive slope. I'm thinking that what I want is a walk-behind mower, 48 inches or...

Hi, newbie here, I have a Toro Z-Master 2000 48" (74901) with a Kohler Command (CV680s). Recently replaced the piston rings and all the other gaskets/seals due to a major 1qt/hr oil burning issue in #1 cylinder, fouling the plug every 4-5 hours, however this repair endeavor was a failed...

I have an old 721D (s/n 482151) with a strong Kubota diesel but the rest of the machine is in terrible shape. The neighbor has a 720K (s/n 5118197) with 720 hrs but it has a blown Kohler engine. Otherwise the machine is in great shape so I'm considering buying it and am wondering if anyone...

Hello Everyone, I have a 98 exmark with the kohler ch25s motor. Last fall I noticed a bad oil leak coming from the breather tube. I replaced all of the necessary parts for that job but in my stupidity I didn't mark the governor in the position it was in before I removed it to do that job. Also...

I have an Exmark Lazer Z 60 Model Number: LZX749EKC606, Serial number: 312627431. Does anyone have a picture of their correctly assembled throttle body, and governor linkages and springs? My idle is very high after an engine rebuild. Is there a TPS relearn on this engine I can do? Thanks in advance.

this engine powers my Hustler Super-z. Got it back last week from “the works” service (plugs, oil, hydro, etc. Mowed once, about three hours operation. Today I attempted to start it, and no joy. Fuel is making it to the carb, and spark is good. It will run for about a second following a shot...

I have an Exmark Lazer Z 60 Model Number: LZX749EKC606, Serial number: 312627431. The battery is not charging. I followed all of the electrical tests on Kohler’s YouTube channel and the stator put out 53 Volts AC and the regulator had over 12. I noticed both of the wires on my diode were broken...

I have a CV740-3111 with a blown head gasket. I'm taking tearing down before I order parts so I can place 1 order for everything I need. Someone put the shroud screws in wrong and pressed into the plastic intake manifold. I've been trying to lookup the intake manifold part. Every site I go...

Hi, I bought this stump grinder and need to replace the engine. I can't find any numbers on it. Can anyone help please. I called the Small Engine Warehouse and they need numbers to identify the correct one. Its a vermeer model 206

Hello everyone. I have had some bad luck recently with a Walker mower I purchased about a year ago. Details below , brief history of issues the mower ran great for the first few months however from one day to the next I started having problems which i haven’t found a fix for yet. I took it to...

Basically, I'm trying to find the shaft dimensions because my kohler motor lost compression on one of the cylinders. I have no tags or data plates anywhere. Lesco says the model number is K582S but I can't find that motor or data on it anywhere. I can find the K582 but it doesn't even look like...

Hello, I'm seeking some guidance on buying a used 36" walk behind. As you can guess, I am a home owner, and this would be my first commercial mower. I was hoping to buy a Bradley, as they're fairly local to me. But they're out of stock until next year on the mower I wanted. So, I've been...

Hi all, I have a 2000 eXmark Lazer Z with a 25hp Kohler that will crank but not run. The mower was working fine and all of sudden while mowing it sputtered, shut down and wouldn't restart. We got it back to the shop and found the fuel pump is still working while cranking over and it had spark...

This mower runs great, but I need to start it with starting fluid because the pull start has resistance and I can get it cranking fast enough. Its not the recoil starter, I just replaced it, Its almost like I’m pulling against hydraulic pressure. Any ideas? Thanks Doug

I’m looking to buy a new mower and I found a Yazoo Kees 61in 27hp kohler has 600 hours on it. I’ve never delt with yazoo Kees or kohler good or bad mowers?

Hi, I have an old Ferris 61" zero turn (FERRIS 5900612 SERIAL 2000485600) with a propane conversion. Its relatively new to me. It currently has a Kohler CV750-011 30HP which apparently is no longer made. That engine basically needs to be replaced. Question, is there a replacement engine that i...

I have a problem with a 2000 WALKER with a KOHLER CH26S EFI (1300 hrs) and just wondering if anyone else has had a similar problem and repaired it. In the beginning of the problem the mower would cut for 20 mins or so and then go into what seemed like a limp mode. Engine would run rough no power...

Hello All, In advance thanks to those who take the time to respond! i just rebuilt a CH25 (kohler Spec #68562), nep pistons, valves, gaskets, seals, ignition modules, lifters. had the heads machined and valves done by a pro. it will start and run but runs rough with random backfire. if i close...

Question for the experts and the wise... I just completed a build on a new Kohler short block with new heads and valve train. (CH740) The following was completed with 30W Lucas break in oil (10631) and kohler filter 52-50-02. All pressure readings were taken from the breather cover at the...

I have a Kohler Command 30hp and have a question about ignition coils. My engine has been converted to the MDI version via a Kohler kit before I got it. One of the coils seems to be going out and I bought an aftermarket one (See photos attached) that supposedly fits this model. It's different...