Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 29 Results
  1. Professional Discussions
    Question for you experts; Background: Set up a sprinkler system pulling from a creek. I'm using a 2Hp red lion pump. Have 6 zones set up, 5 are for sprinklers and 1 is dedicated for two hose spigots (one down to a dock as its to far to run fresh water). The pump is currently running 60psi for...
  2. Homeowner Assistance Forum
    I’m hoping to find an answer to get a residential irrigation system up and running for the year. Pump itrigation out of a canal with a rain dial controller and Hunter pump start relay. I’ll manually start a station and the relay clicks, the pump starts for a few seconds, water draws up, as the...
  3. Mechanic and Repair
    Hey guys, I have a 2012 ish 930D with only 300 hours and the left hydro pump seems to have went out today while mowing. No warning noises at all... just stopped working. No leaks, fluid is good, linkage seems fine, right side works fine. The fan is not spinning on the left pump, and I can turn...
  4. Mechanic and Repair
    Hey guys, need some help with my spray rig pump. I have a 100 gal fert tank with a remco fatboy pump. Electric, 12v, 7 gpm. I've calibrated it so I need it to be at 150 psi for spraying, before pulling the trigger on my lesco. It can get to 150, but for some reason the amount coming out once I...
  5. Mechanic and Repair
    Morning all, I have an exmark 72" Lazer z with around 3k on it. I have lost some hydro pressure while going up an incline. I have replaced the hydro drive belt but same issue. I have also read through some posts and guy had similar issue and his bleeder valve was loose allowing pressure to...
  6. Pesticide & Herbicide Application
    TLDR: Anyone having issues with the 7 gpm delavan pump on their zsprays? Hey first time asking a question here but i wanted to see if anyone else was experiencing similar issues. I bought a new 2019 zspray zmax this spring and went with the 7gpm pump option. I used to have a 2016 zmax with...
  7. Pesticide & Herbicide Application
    I bought the Eliminator 1 Gallon Multipurpose Sprayer for small problem areas. I did a calibration test for the mist and got 1/4(.25) of a gallon for 1000 sq ft. And it took 3 minutes. Is that normally possible?
  8. Fertilizer Application
    Hey guys, For those with spot spraying setups (I only use a spray gun, no booms), how long do your 12V pumps usually last? When I sprayed mesquite last season, it ran for several hours a day. I'm curious to know the lifespan of other's pump setups and their specs. Considering an upgrade when...
  9. Pesticide & Herbicide Application
    Hey guys, For those with spot spraying setups (I only use a spray gun, no booms), how long do your 12V pumps usually last? When I sprayed mesquite last season, it ran for several hours a day. I'm curious to know the lifespan of other's pump setups and their specs. Considering an upgrade when...
  10. Mechanic and Repair
    Hello all, I’ve got an older Toro Groundsmaster 325-D. It has a Mitsubishi K3 engine. It’s always been a hard starting machine, since I’ve owned it. I had my Dad mowing with it the other day and he thought he ran out of fuel. He filled it back up (with diesel) and got it started and...
  11. Homeowner Assistance Forum
    I'm trying to rehabilitate my yard this year and the first order of business is to get the irrigation system working. I know how to do a lot of the basic stuff and am in the process of replacing and adjusting sprinkler heads, identifying and replacing broken pipe, and the like. However, I'm...
  12. Pesticide & Herbicide Application
    Hello, I calibrated my 4 gallon 20 volt powered Chapin backpack and came up with 1.875 gallons per 1000 square feet. I did a 50 square feet area in about 19 seconds. Am I walking too fast/slow? Or does this sound about right. How?: I tested in a 50 square feet area and got 12 oz. I then...
  13. Marketplace
    Hey all! I always forget the direct coorelation between the growth of an organization, and the loss of space that inevitably comes with. These are off of a parts pallet that was moved to facilitate another load of fertilizer (3rd Semi load of the year! Items for sale include: -HyPro D50 Pump-...
  14. Marketplace
    1 Hsp Shallow Well Pump with Stainless Steel Housing by Pacific Hydrostat Used but in perfect working order. Questions call Casey at 661-340-7487 I'm located in Bakersfield, CA Shipping is available.
  15. Professional Discussions
    Just did this last weekend. The lake we pump out of is down a bit with low rain levels this time of year (normal for this time of year). The pump inlet thats suspended above bottom of lake actually ended up high enough to allow air to enter the suction line and the pump (Sta rite DHH) ran for...
  16. Mechanic and Repair
    I am having a problem with one of my drive wheels. When I try to go in reverse with my left wheel it only rotates at a slow speed. It operates fine in forward ad the left side works good in both directions. Any idea what the problem might be or how to check it. Im not ure if its the pump or the...
  17. Mechanic and Repair
    I have a older 48 inch wright stander I had to replace a seal on the pump started to leak out of a hose so my buddy took a shop vacation so it didn't get all over the shop floor ... big mistake now we have air in the whole system I know everything I have looked at says to open the bypass move...
  18. Mechanic and Repair
    I need help removing the pump belt. I have gotten it off the of the tensioner. How do I get it round the engine shaft.
  19. Seal Coating Forum
    wts aro 2" dual diaphram air pump and filter basket $1000 obo used twice
  20. Mechanic and Repair
    I have a Husqvarna IZ6123 61" 23 hp Zturn mower with 500 hours. Last fall, my left Parker hydro pump (H110A2011DDAAX) developed a leak and upon opening it, there were metal shavings inside. The thrust bearing and rotor shaft were trashed. So, I ordered parts and rebuilt that pump and as a...
1-20 of 29 Results
Top