Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Heavy Equipment & Tractors
    So I've heard more and more about the RC-30's reliability issues with tracks, drive motors, torsion bars locking up, ect. I'm hesitant to buy another in the future. Does the RC-50 have the same drive train issues as the RC-30? How many grease fittings are on the torsion links? Do the 50's...
  2. Mechanic and Repair
    While clearing brush I ran over a bump and the engine started cutting out.. A few seconds later it died. It would start up for a second or two the first couple of tries, then it wouldn't start at all. It almost sounds fuel related but that is purely a guess. Any ideas?
  3. Heavy Equipment & Tractors
    Six fittings on the undercarraige of my ASV are clean and accesible -- but they aren't taking grease. There is a lot of pressure on my gun and none is going inside the fitting. Is there a tool or procedure for freeing up stuck fittings? thanks!
  4. Heavy Equipment & Tractors
    Ok well I bought my first CTL today.. it's a 2003 ASV RC-30, has a little over 500 hours and seems to be in decent shape - except for the right track. Almost all of the underside lugs have been chipped/broken off on the inside. I don't know what could have caused it, other than a rock or...
  5. Heavy Equipment & Tractors
    Have a line on a 2001 ASV RC-30 with 1100 hrs, with remanufactured grapple bucket and smooth dirt bucket for 10,000. Owner says tracks/undercarraige are ~50%. Paint is faded. Supposedly runs well. Owner sells these in bulk for a rental store, goes through them completely to make sure they...
1-5 of 5 Results
Top