Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. Lawn Mowing
    I cut with a Snapper pro 125xt. When it comes to striping my mower does lay stripes but my tire on the discharge side always covers up the tire mark from the last pass because the blade on the discharge side isn't able to cut past the tire so it leaves a little stripe and not the nice two tire...
  2. Marketplace
    06 WS, 52 inch fixed deck, new 25hp Kawasaki engine, battery, blades and belt with 12 hours. 09 WS 36 inch fixed deck with a 19 hp kawasaki engine, 126 hours purchased new. Two echo 770T backpack blowers. Two Stihl FS90R trimmers 2015 enclosed tandem axle 7x16 trailer, black, paid $4200 new...
  3. Mechanic and Repair
    New to the site so I hope this is the right place for this question. I run a small lawn company (about 40 weekly lawns) and use 2 fixed deck Wright standers. They both seam to not stripe super well. Is this symptomatic of a fixed deck? I know the blades are just standard blades you would get on...
  4. Lawn Mowing
    I have a Worldlawn 33" Residential/Commercial walk behing that is just over 1 year old. Lately It's leaving a noticeable stripe along the right edge, and possibly the left. The center blade is ALWAYS a perfect cut. I've been told that this is an indication that the blade(s) are not turning as...
  5. Lawn Mowing
    I'm running a Scag Pro-V with a 52' Velocity Deck. I only got to run it a few weeks before winter set in and didn't really get it tuned in for striping the way I want it to. I normally cut St. Augustine or Bahia. I know pitch of the deck can be an Issue but the Velocity deck has the custom...
  6. Lawn Mowing
    My father in law is in the process of purchasing a striping kit. I am helping with the search. I went to bigleaguelawns.com and found one. His mower is a 50" zero turn Troy-bilt. The striping kit that big league lawns sells is $298 plus additional cost for larger kits. We really want to buy...
  7. Lawn Mowing
    Saw some discussion on this, here is what I built to stripe my yard with a toro recycler. Works pretty well. I plan to add to it, maybe a rubber flap, or I think I could slip a conveyor roller in the holes where I screwed into the broom head. So far I am in 8 bucks.
1-7 of 8 Results
Top