Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Mechanic and Repair
    I have an Exmark Lazer Z 60 Model Number: LZX749EKC606, Serial number: 312627431. Does anyone have a picture of their correctly assembled throttle body, and governor linkages and springs? My idle is very high after an engine rebuild. Is there a TPS relearn on this engine I can do? Thanks in advance.
  2. Lawn Mowing Equipment
    How do I adjust my weed eater idle. When I start my weedeater up,it idles at full speed. I tried adjusting screws on the carburetor it didn't change the speed.
  3. Mechanic and Repair
    Is it okay to run a 2 cycle blower with an 'itchy' trigger finger? I mean, should the throttle be held at a steady speed, rather than pressing the trigger all the way down for a microsecond, then releasing it and then repeating this over and over? We have a one-year-old Stihl SR450 mist blower...
  4. Mechanic and Repair
    Hello, I would like to setup a manual/twist style throttle for a V Twin Vanguard 20hp model number: 358777 0114-e1 I have attached a cable to the bell crank just for testing purposes, this bell crank is "attached" to the governor via a spring, the governor is then attached to the carb by a...
  5. Mechanic and Repair
    I need some help guys. I am stumped on this trimmer. Its my personal trimmer, I have two km units, this was used as a edger and never got as much use as the string trimmer. This year I decided to swap attachments and use this a lot more as a string trimmer. I put a new carb on it last month and...
  6. Heavy Equipment & Tractors
    I've got a 2000, Bobcat 773 G-Series machine with 1100 hrs. on it and it has been a really good machine over the years except the throttle is becoming a bit of a pain. I've had other machines that will reduce throttle if I come across an unexpected rock and the machine gets a sudden "jolt"...
  7. Mechanic and Repair
    So I was mowing yesterday when all of the sudden I lost about half power!! I mess with the throttle cable, no issues. I tried the simple things first, changed the plugs, checked for spark on both plugs (got it), replaced the fuel filter, clean the air filter. So as goofy as this sounds, I...
  8. Mechanic and Repair
    I have a Exmark TTHP with a 17HP FH500V Kawasaki engine on it. Sometimes it runs great with full throttle all the time, but others times I will have the throttle up all the way, then I engage the blades and the engine doesn't throttle up all the way. The past couple of days this has happened...
  9. Industry Surveys & Polls
    Do operators prefer tube controls or hip controls, or does it even matter?
  10. Mechanic and Repair
    My Echo SRM-230 is having major issues. The engine starts and idles fine. When you pull the trigger to throttle up, the engine barely revs and blows more smoke than normal. It is useless for the work. I have gotten around this because I swapped my engine from my edger (same engine) over to...
1-10 of 10 Results
Top