Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Marketplace
    This is my first time posting on the site. My apologies if I'm posting in the wrong spot. I have a Scag Tiger Cub 48"with a broken/badly repaired front caster support. I would like to find a used one in good shape. The Scag part number is #451470. Let me know what you've got?
  2. Mechanic and Repair
    .new clutch .new pto switch chewing up belts Now! Suspect idler pulley but pulley seams fine. However last year I found mounting bolt loose which allowed pulley to tip various angles I tightened it down till set and stayed level. Been chewing belts ever since. Any idea?? STC48A 20CV SER NO...
  3. Mechanic and Repair
    My 04 Scag cub started vibrating a few years ago when I was in forward throttle going up a hill. It has had a hydraulic leak for a long time. I just keep replacing the fluid and make sure it is full every time before I mow. When it happened the first time, I just replaced the fluid and...
  4. Mechanic and Repair
    Hey guys, Dnash here from the FL panhandle. This is my first post on here. I'm not in the lawn care profession at the moment, but may be a some point down the road. Anyway, I picked this 08 Scag tiger cub, the hour meter says 3231 on it but it seems to have a fair amount of new parts on it. I...
  5. Mechanic and Repair
    Hello from Indiana! I'm quite new here but have been reading for days on scag tiger cub issues. I recently acquired a 2005 Scag Tiger Cub. The previous owner says the exhaust cause some tall grass on fire which then caught the motor on fire. The motor has a severe oil leak (Kawasaki...
  6. Mechanic and Repair
    I have an 03 tiger cub that is experiencing some power issues. When I engage the PTO it does not seem to ramp back up to full power and when I am mowing average height grass on level or uphill grades is loses significant power. Last summer I had both coils replaced (one went bad and just had...
  7. Mechanic and Repair
    Picked up a 06' or '07 tiger cub 61" cut with the 23 hp vanguard Briggs. Every time I go to use it, something goes wrong and I waste a ton of time screwing with it. It came with a known charging system issue, I've got 30+volts coming out of the stator, the key switch is good, I put on a new...
  8. Lawn Mowing Equipment
    My scag with a 19hp Kawasaki engine in a 48 inch scag tiger cub randomly shuts off. Model has 2,400 hours but runs amazingly. Upon starting it takes three or so 4 second cranking sessions and runs fine. It has a brand new fuel pump, tank valve switcher, air filter, gas lines, and new fuel in...
  9. Mechanic and Repair
    Hello Lawnsite! Excellent forum! First time poster here. Has anyone converted or repowered a Scag Tiger Cub or Tiger Cat from air cooled to water cooled? Current Mower: 2004 SCAG Tiger Cub, 19hp Kawasaki FH601, 48" deck, the Kawasaki blew a rod bearing at approx. 1,400 hours. I decided to...
  10. Lawn Mowing
    This is my first post on here so bear with me here. I have been in the Lawn Care & Landscape business for about 4 years now. I have been using a Cub Cadet RZT 50" w/ a Kawasaki 22HP. Along with a John Deere push mower. I have decided that it is time to upgrade. My mower isn't high-grade enough...
  11. Lawn Mowing
    I have opportunity to get a 2008 tiger cub with hurricane mulch kit with only 75 hrs for $5300 . It has the 23 briggs vanguard and 52 in deck.Is this a good deal or an ok one? underpowered? Theres not a thing wrong with it hardly a scratch has been well taken care of.What do you think?
  12. Homeowner Assistance Forum
    I have an opportunity to purchase a used Tiger Cub for about 5K. It's a 2007, 61" with the 23 horse Briggs. 91 hours (yes, *91*). I haven't found much information on this model so haven't been able to find many reviews on its durability or longevity. We have 6 acres, but only mow about 2.5 of...
  13. Lawn Mowing
    I have an old scag Tiger Cub 48" 19 Kaw. It has been sitting outside for over a year. I am thinking about cleaning it up and dropping a new motor on it. Is that a really bad idea?
1-13 of 13 Results
Top