Lawn Care Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 28 Results
  1. Mechanic and Repair
    Anybody ever have issues with the hydro walk SD transmission? Got this unit from a customer who had just put a brand new engine on the unit(Why? idk). But, whatever the case, it's a pretty clean unit that now has a new motor with a transmission that they don't make parts for. It seems like it...
  2. Mechanic and Repair
    I have a 48"bobcat ransomes xm4810 with the worm gear drive transmission (not the peerless) and I recently noticed after using it, the transmission feels hot to the touch. Like if you held your hand there you would get burned. I am using it with a sulky but I'm not that heavy (like 120 lbs) so...
  3. Mechanic and Repair
    Hi Folks, I have an older 33" Cub Cadet walk behind. It was working great until it cut about 7 swaths on the yard and the transmission cut out. Just wondering if anyone has any thoughts before I lift it up and start removing parts? When I engage the transmission lever the unit makes it's usual...
  4. Mechanic and Repair
    I have a Bobcat ransomes xm4810 that is leaking transmission fluid out of the "bearing seals" (where the Jack shaft enters and exists the transmission horizontally) and I'm wondering how much of a pain it is to take the transmission apart and change them? And also if its woth it? its leaking...
  5. Homeowner Assistance Forum
    TL;DR - Zero turn shopping. Can't decide between ezt and zt-2800(or better) transmissions. Anyone have real world experiences they can share? particularly having had both transmissions for a decent amount of time. As most of the folks out there, I'm considering buying a new zero turn for our...
  6. Trucks, Trailers and ATV/UTV
    Hi, I have 2007 Isuzu NPR GAS transmission is not shifting. Anyone ever experience the gear is not shifting, no drive or reverse for couple of minutes then drive normally. my truck has 160k miles on it. Thanks for any help.
  7. Mechanic and Repair
    I've got a question for anybody who can tell me about this BCS walk-behind tractor I've got, model number 749-PS. Long story short, I got this used tractor in two pieces: on one hand was a box of gears, on the other hand was everything else. The PTO cover had been removed from the transmission...
  8. Mechanic and Repair
    There are couplers on each side of my Tecumseh/peerless transmission 3628-p1 for my Scag 48sw. One is leaking a few drops of grease. Can i grease this with regular chassis grease via the zerts? Or is this a sign that my transmission is about to head south? I have noticed no issues with...
  9. Mechanic and Repair
    My old mower stopped moving forward or backwards, ran out of gas coming out of dichotomy & traffic barreling down rd. I shoved it off w/o pulling neutral rod on backside out, we'll now won't go , probably forced something apart? Belts still intact, see movement behind the leaver, wanted to...
  10. Mechanic and Repair
    I'm trying to figure out if I need one or two of part number tca19507 for my mower. The problem is that no where online can I find an actual picture of the part. All I can find is schematic pictures. If anyone with a z800 series mower can take a picture of the breather on the top of their...
  11. Mechanic and Repair
    I have an EXmark metro 36" walk behind belt drive with the 12.5 Kawi. I just started using a sulky two weeks ago. For the first week the thing was a champ. Mowed everything no problem, hills no issue, turns no issue. All of a sudden this weekend it's started to slow down when going up slight...
  12. Mechanic and Repair
    I have a older scag 36" walk behind that has a very sloppy transmission... It does not feel like it engages firmly into any gear and will slip out of gear if the mower is on any sort of a cross hill slant... My amature diagnosis is that the tranny is smoked... That being said, has anyone dealt...
  13. Trucks, Trailers and ATV/UTV
    Hey everyone, I have a 2005 gmc sierra 1500 4.3 v6 2wd and manual transmission. Heres the deal, I thought my throw-out bearing was going bad but i figured out that its my front transmission bearing. This basically means that my transmission will have to be re-built. The truck has 99,000 miles...
  14. Mechanic and Repair
    48 Scag belt walkbehind has a problem when in gear. It will move once in gear but stops suddenly & has to be pushed to start again. Especially up hills, using a sulky or any terrain where is has climb. I tightened the tensioner under the deck cover taunt but not overtightened. The belts...
  15. Mechanic and Repair
    I have a older 48 Scag bd walkbehind & had the jackshaft pulley rubbing against the spring. I thought the key in the pulley was loose so I tighten it...which did nothing. For some reason the jackshaft keeps sliding over pushing the jackshaft pulley into the chain, scraping the chain, belt...
  16. Lawn Mowing
    I am trying to replace the transmission belt on this machine and it appears you need to pull the engine apart to get the old belt off, this can't be right but I am at a lose, if anyone can help that would be greatly appreciated. Thank you.
  17. Mechanic and Repair
    I have a 2008 Scag 36" walk behind (belt driven) with probably 50 hours on it. I've had a few problems in the past with the engine dying when I place the transmission into gear. Some fiddling with the Operator Presence Switch and it seemed to be OK. The other day I just started mowing and...
  18. Marketplace
    Information -V8 -Does not include rack -Utility Body -Needs engine work -NEW transmission with less than 5,000 miles -Mileage: 120,000 -NEW Front End Work -Extended Cab PRICE: $2,800 WILLING TO NEGOTIATE PRICES
  19. Marketplace
    I need a manual transaxle for a Scag (of Ferris) 3 wheel mower. Mine is 72", but I believe the 50" is the same Part Number 48003 Ron Stidmon Enon Valley Farm [email protected]
  20. Mechanic and Repair
    Hi all, New to the site and have a SCAG 48" walk behind (belt driven). Occasionally (more often in 2nd and 4th but now in 3rd a little), the transmission seems to be slipping out of gear. I just got the mower used and everything else appears to be functioning properly. I've checked the tension...
1-20 of 28 Results
Top