Search Results for ‘won't start’

I replaced my battery and now when I turn the key to the on position the starter engages. I think it had nothing to do with battery replacement but thought I'd mention it. I jiggeled everything working the key back and forth and finally got it to run and starter disengaged but when I turned it...

When riding My p-zt 48 for over an hour recently I stopped the engine to get a cold drink. The engine had not even cooled when I attempted to restart. I have checked and rechecked the seat kill switch and even rigged it so no false kills occur. There is plenty of fuel, the fuel line is 'on'. Any...

Recently changed the head gasket on my Dixie Chopper Silver Eagle, it has the Kohler Command 25 engine (CH 740). It started and ran perfectly after replacing until i noticed oil leaking from right side of oil pan, i assumed it was from the engine gaining full pressure after the head gasket...

I have a 36" lesco walk behind that won't start. I pull started it one day, started to idol, and when I went to engage the blades and it died! So i tried to pull start it again and now it won't start. It has a 14hp kawasaki motor with a key to start but it is a pull start. I ordered a new...

Hi everyone! I have a Ryobi ry09055 leaf blower that will only start with starter fluid. After that it idles great but only revs if I turn the choke on a little. It is a brand new carb and the fuel is fresh. Any advice is appreciated. Thanks!

Hello, About two days ago, I left the key in my Exmark Radius mower in the on position by accident and drained the battery. The battery is fully charged now and still won't start. I found and checked one fuse. I'm at a loss why there is no power, hour meeter is blank. Any suggestions? Thanks!

Hello from Northeast Mississippi, Newbie here so please be gentle. I have conducted searches but can't find anything on here that pertains to my problem, so any and all help/suggestions/recommendations are very much appreciated. I have a older eXmark Lazer Z with a Kohler Command Pro 23 engine...

Mower won't start or click. Replaced ignition switch, solenoid and blade switch. Keeps blowing fuse between ign switch and solenoid. Solenoid appears to be ok when jumped. Going crazy.

I have a 2006 Kubota B7800, hydro. I bush hogged a large field, got off the tractor to clean it, blew off the radiator with an air hose, got back on the tractor and it wouldn't start. I can jump start it with the solenoid, but it will not start with the key. I've checked the safety switches and...

I recently purchased an Encore Prowler 72" mower with the Kawasaki FD750D 27HP Liquid-cooled engine. It has 369 hours. I put about 12 hours on it and it was working perfectly, then the engine just quit like it ran out of gas, although I have a full tank. It will crank over but won't start. I...

Hello, A family member recently picked up this mower used and got about 8-10 sessions in before it decided to not start. Turning the key switch yields nothing. Here's what I'm finding: Key switch has 12V on the red wire coming in Turning the key to on or start causes the 12V to come off...

Just inherited a Wheelhorse Hydro 520-H. It has been sitting unused for several years. About two years ago, it would turn over and ran perfectly... after fiddling with the kill-switch. Hasn't been started for about two years. Now, won't start, turnover or make a sound. Just put in a new battery...