1996 48" Bunton Walk Behind Mower

Discussion in 'Lawn Mowing' started by cr2sc, Jul 19, 2004.

  1. cr2sc

    cr2sc LawnSite Member
    Messages: 2

    Have just purchased a used 1996 48" Bunton Walk Behind Mower which had no manual. Trying to locate a dealer where I can obtain a copy. I am located in Massachusetts, if anyone has any information as to where I can get an owners manual or parts catalog for this 1996 model I would appreciate any information anyone can give me.

    Thanks for any help,

  2. birdmann

    birdmann LawnSite Member
    from fla
    Messages: 13

    Well i dont know of a dealer that is located in Mass. , however i do know one that is local down here in the Ft. Lauderdale area ..Try a place called GreenThunb located in Tamarac, Florida ...The phone # is 954-726-0860 ....Ask for a guy by the name of Joe ..He seems to be " the man"....

    Hope this helped ...
  3. Tharrell

    Tharrell LawnSite Silver Member
    Messages: 2,967

    You can get all that stuff online at the Jacobson website. It's in pdf format. Free
  4. Itsgottobegreen

    Itsgottobegreen LawnSite Silver Member
    Messages: 2,177

    The boston lawn mower company. They have a couple of stores.
  5. cr2sc

    cr2sc LawnSite Member
    Messages: 2

    Thanks to you all for the quick response. I truly appreciate all your help. I will definately contact the names listed above. I have attempted to get onto Jacobson's website but I was unable to get past the registration point. Someone today told me that parts over ten years old are difficult to come by, have any of you found this to be true? He said that he has been unable to obtain a current catalog from Textron since 1999 although still able to get actual parts. Have any of you experienced this at all? Thanks again for your help.
  6. TrueTrim1

    TrueTrim1 LawnSite Member
    Messages: 23

    I would get the contact information from the Jacobson website and email them. Earlier this year I bought a used Bunton with no manuals. I emailed Jacobson, and within a couple of days, they sent me the owner's manual and the parts manual for my mower in PDF. I printed them out, and they've been quite helpful in getting the parts I need. As far as obtaining parts go, my mower is a 1998 and I've been able to get parts through my local dealer and special order though J-Thomas.
  7. lawnmedic1

    lawnmedic1 LawnSite Member
    Messages: 122

    I think you will find that most parts on your bunton are interchangeable with other brands of mowers. Check out one of the on-line parts suppliers...Chuck

Share This Page