Lawn Care Forum banner

2 Cycle Engine Oil : Echo Red Armor verses Echo Power Blend Gold

71K views 100 replies 33 participants last post by  Mark Oomkes  
#1 ·
I've been using Echo Powner Blend Gold 2 cycle oil in my Echo string trimmers as long as I can remember. Today before placing an order for more, I did some research and discovered that the Echo Red Armor is far superior in any aspects.

I've enclosed a 38 minute webinar that explains everything about 2 Stroke engine oil. I didn't realize how critical the quality of the oil is to the longevity and daily performance of the engine.

Jason Wilk's (ECHO) interview from the 2018 Spring Into Action Webinar hosted live Saturday, March 24th! His topic talked about understanding everything about 2-stroke oil!

From this day forward I will be using Red Armor.

 
#14 ·
For the record, Im not an Amsoil fanboy and I am not running it at 100:1 like they recommend, however it has been clean burning and the smell is not obnoxious. Its also lowered the amount of crap that comes out of the exhaust of my Stihl KM94, that thing spits crud all over from the muffler.
 
#24 ·
I bought 4 of the 1 gallon echo power blend gold to start the season off right after leaf season. Got a tip and pour to keep in the truck with the line marked for my guys to easily see. We are now into gallon #2 and to me I see no difference between it and the 5 gallons of Oregon syn blend I used before this. I guess time will tell.
 
#31 ·
#38 ·
I burn super tech oil in my handheld equipment. 8 ounces to 3 gallons of gas it makes it 50:1 or close to it.
Burns clean and cheaper than any oil and my equipment still runs fine.
If you are referring to the Walmart Super Tech Oil, from every video and all information I've researched on 2 cycle oil comparison, Walmart Super Tech for commercial equipment is probably one of the most inferior quality oils available.

Just because your equipment is running fine now does not mean the inside of the engine will continue to optimize performance long term.
 
#35 ·
Echo oil is priced to high here in my area i remember for the longest time it cost 1.79 plus tax for a 1 gallon mix and now it is 2.99.

Now i can say there is one good oil available at ace hardware that is clean burning and it more likely to be in stock that is ace low ash two cycle or the syn blend oil.

Here is a easy mix ratio chart for 50:1
2.6 oz = 1 gallon
3.2 oz = 1.25 gallon
4.0 oz = 1.50 gallon
5.2 oz = 2 gallon
6.4 oz = 2.50 gallon
8.0 oz = 3 gallon
12.8 oz = 5 gallon
 
#44 ·
Any modern cheap API TC oil will protect well enough to keep the engine going strong long after the tool is retired for some other reason. More expensive oils can run cleaner, less smoke, smell nicer, but they'll all lubricate the engine just fine.
With all due respect is this only your opinion or do you have proven data that backs your statements.

Some engineers who have researched and compared oil's extensively have stated that inferior oils can destroy an engine in 6 hrs., whereas the same engine lasted 1500 hrs. and the internal components remained clean showing very little wear.
 
#47 ·
Red Armor user here! Last year, the bottle's were on sale at one of the local dealers, so I made sure to grab a few extra. In my "stihl" phase of life, I used their oil for yearsss, then tried some VP and eventually switched to Red Armor a few years ago as a few engine porters on the chainsaw forums recommended it. Id like to try some other brands like Shafers, Amsoil and Opti, but they are harder to find locally.

I use Belray H1R oil for my 2 stroke bikes, now that stuff isnt cheap lol.
 
#48 ·
Red Armor user here! Last year, the bottle's were on sale at one of the local dealers, so I made sure to grab a few extra. In my "stihl" phase of life, I used their oil for yearsss, then tried some VP and eventually switched to Red Armor a few years ago as a few engine porters on the chainsaw forums recommended it. Id like to try some other brands like Shafers, Amsoil and Opti, but they are harder to find locally.

I use Belray H1R oil for my 2 stroke bikes, now that stuff isn't cheap lol.
I use Schaeffer's outboard oil in my lawn boy and toro when it is available i can get it locally for $6 per quart It is good oil just smells a bit weird.
Treemonkey aka scott on opeforum recommends Schaeffer's
Mastermindworksaws aka randy uses h1r but it is expensive.

Motul 800 2t is my favorite but it is hard to find locally so i normally run cheap oil instead with out issue.