Separate names with a comma.
Discussion in 'Mechanic and Repair' started by bare31, Jun 4, 2008.
Can anyone give me the specs and procedure for setting the valves on a Briggs 24 hp els? Thanks
any help guys???
TDC and .004. Briggs gives a specific set of numbers, but .004 seems to work just fine.
Briggs OHV valves are set with the piston 1/4" PAST TDC.
Lash is in the operators manual.
If you don't have one-
Thanks for the help guys. I found it in the manual after you suggested. I posted all my problems w/ this engine on the commercial forum, any help would be greatly appreciated.