1. Ask the Expert: Fertilization Strategies for Success: Dec. 12, 2017
    Learn how to do more with less when it comes to your fertilization services. Join the live Ask the Expert event hosted by Koch Turf & Ornamental: Dec. 12, 12-2 p.m. ET in the Fertilizer Application forum .

310 Units

Discussion in 'Gravely (Archived)' started by JEFF ZALMANOFF, Feb 28, 2002.

Thread Status:
Not open for further replies.

    JEFF ZALMANOFF LawnSite Member
    Messages: 53

    hi i am looking at your promaster 310 outfront mowers , i like alot of the new things about them i wanted to know if they are as stable on hills or inclines as they used too be ,i know that you put bigger tires on them so is the center of gravity higher now ? ihave been running tro groundsmasters for nine years and they have been good , but i like your auto deck height adjuster alot, i have to change cutting heights some days five or more times so this would be great. also what do you think is the best for hills , drainage areas , some are 15,20,25 degree inclines . is it a ztr or outfront 3 wheel rider like your 310 , also if i bought a 310 unit would it void the manufactors wart. if i built a engine area cover too cut down on engine noise and to protect it from rain etc.?? thanks alot Jeff Z
  2. The Gladiator

    The Gladiator Member
    Messages: 70

    Mr. Zalmanoff, Thanks for your interest in the Gravely products.

    To answer your questions, the PM310 is as stable as the PM300 because of the taller wider tires. The center of gravity is slightly higher however, the wider tires more than make-up the deference.

    I don't believe you would void the warranty with a shield over the engine unless you restrict the airflow too much. Should you decide to do that, please take temp reading before and after modifications to make sure.

    With regard to the best unit for hills, I would have to say it would be the mid-mount ZTR as the full weight of the mower adds to the traction weight.

    With any out-front unit the deck is suspended between the traction unit and the front caster wheels which takes traction away from the drive wheels. Also with the deck out front the weight of the deck tends to pull the front of the unit down hill.

    I hope this has clear-up the questions you may have, and I hope you consider a new Gravely PM250, 260 or 272 should you decide to go with a mid-mount machine.

    If you have any othe question, please feel free to e-mail me.

    Dan Kilgas
Thread Status:
Not open for further replies.

Share This Page