36" Stand On

Discussion in 'Lawn Mowing Equipment' started by jmcginnis89, Jan 21, 2020.

  1. jmcginnis89

    jmcginnis89 LawnSite Member
    from Texas
    Messages: 12

    Do any of you ever have issues with your 36" stand on not fitting through a 36" gate? What brand/model are you using that allows you or doesn't allow you to fit?
     
    K c m likes this.
  2. Mark Oomkes

    Mark Oomkes LawnSite Fanatic
    Messages: 19,809

    Only the first time...J/K. Not that I know of.
     
    hort101, K c m, MILLC and 1 other person like this.
  3. Doc8406

    Doc8406 LawnSite Fanatic
    Messages: 26,517

    emoji finger wag.gif
     
    K c m and Mark Oomkes like this.
  4. rippinryno

    rippinryno LawnSite Silver Member
    Messages: 2,131

    I can't use a 36" because i have several gates that are too small for it. 32" stander is what i went with.
     
    Mattmowsgrass likes this.
  5. Mark Oomkes

    Mark Oomkes LawnSite Fanatic
    Messages: 19,809

    I wish you hadn't said that...it's like the Bat signal to a certain fella in Kannada.
     
  6. Turf Tracer

    Turf Tracer LawnSite Fanatic
    Messages: 5,978

    We in the Land of Gated Yards here and gates usually 38” or 34”. 90% are 38” and will fit a 36.
     
    Mattmowsgrass and kemco like this.
  7. hal

    hal LawnSite Silver Member
    from Georgia
    Messages: 2,608

    Any 36 standon can fit through a 36 gate if you go fast enough!
     
    Mattmowsgrass, Dawson, K c m and 3 others like this.
  8. OP
    OP
    jmcginnis89

    jmcginnis89 LawnSite Member
    from Texas
    Messages: 12

    Where are you located? And which manufacturer did you go with?
     
  9. ltdlawn

    ltdlawn LawnSite Platinum Member
    Messages: 4,864

    are you magic mark?
     
  10. Networker

    Networker LawnSite Member
    Messages: 9

    No 36" mower will fit through a 36" gate. On the mower the 36" means cut-width. The deck has to be wider to cover the blades. So my Gravely ProStance 36" is actually 36.5" wide. I think that is pretty typical for most mowers.
     
    jmcginnis89 and ltdlawn like this.

Share This Page