1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

36" tthp grease zerts

Discussion in 'eXmark' started by Craig T, May 28, 2003.

  1. Craig T

    Craig T LawnSite Member
    Messages: 87

    Picked up a new 36 tthp a few weeks ago and was wanting to know how many grease zerts there are. The manual shows like maybe 13 - 14 but it also looks like the 48" model? So far I have only been able to locate 8.

    ThanKs Craig
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Messages: 4,258

    Craig T,

    Here is a list of the grease points for your machine. 36-48-52 inch units have the same number of grease points. I come up with 10.

    :caster wheels 2
    :caster pivots 2
    :blade engagement bellcrank 1
    :idler pivot (pump drive) 1
    :clutch arm pivot 1
    :Idler pivot (cutting deck) 1
    :pump control bearings 2

    Thanks, Fred.
     
  3. SUGAR_CUT_MARK

    SUGAR_CUT_MARK LawnSite Member
    Messages: 77

    what's the best type and brand of grease for my exmark metro 48" walk behind
     
  4. eXmark

    eXmark Manufacturer / Sponsor
    Messages: 4,258

    Sugar Cut,

    The manual recommends GLI #2 multi-purpose grease.

    None of the components you are lubricating are high speed or even high load areas so you don't need to go crazy with a super high grade of grease. Just make sure it's a good general-purpose grease and you should be in good shape.

    Thanks

    Terry
     

Share This Page