1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

4 in 1 bucket for Toro Dingo

Discussion in 'Heavy Equipment & Pavement' started by Brian M, Jun 14, 2008.

  1. Brian M

    Brian M LawnSite Member
    from CT
    Messages: 94

    Does anyone know if there are any manufacturers out there that make a 4 in 1 bucket with a cubic foot capacity larger than 3.5 cuft, to fit a Toro Dingo???
     
  2. bobcat_ron

    bobcat_ron LawnSite Fanatic
    Messages: 10,137

    I know ASV has a small combo for their RC30, but maybe not small enough, Bobcat maybe...........
     
  3. minimax

    minimax LawnSite Senior Member
    Messages: 734

    Try bradco or skid steer solutions.

    minimax
     
  4. jrdean62

    jrdean62 LawnSite Member
    Messages: 68

    Check with Bradco I think they have the best prices
     
  5. Junior M

    Junior M LawnSite Fanatic
    Messages: 13,595

    bobcat does for there walk behinds and it should fit......

    bobcat attachments fit everyother brand of equipment so they should fit a dingo
     
  6. bobw

    bobw LawnSite Senior Member
    Messages: 807

    Nope! Bobcat uses their own system. Toro, Ditch Witch, etc all use a common plate; you need an adapter to use the bobcat ones.
     
  7. Brian M

    Brian M LawnSite Member
    from CT
    Messages: 94

    Thanks for the replies,
    Bradco list theirs as a 5 cu. ft, but I don't know if thatÂ’s struck or heaped, if it's heaped than it's close to a 3.5 cu. ft. struck which I see a lot of on ebay from time to time. And I was wondering if there was one with a larger capacity than that?
    Like maybe 6 cu. ft. struck or slightly larger.
     
  8. Junior M

    Junior M LawnSite Fanatic
    Messages: 13,595

    why wouldnt it fit........

    the plate that ditch witch and toro and boxer was invented by bobcat in the sixties or seventies and it is the same thing as the toro and boxer so why wouldnt it fit?
     
  9. CHE3TAH

    CHE3TAH LawnSite Member
    Messages: 14

    Because Bobcat uses a unique attachment plate proprietary to Bobcat attachments. You can get adaptor plates for Bobcat equipment to run standard on most other brands. (i.e. Ditch Witch, Toro, Boxer, Vermeer, etc.)
     
  10. Junior M

    Junior M LawnSite Fanatic
    Messages: 13,595

    so this unique plate you are talkn about is only on the walk behinds?

    cuz bobcat advertises that there attachments will fit any skidsteer?
     

Share This Page