52" turf tracer striping

Discussion in 'Lawn Mowing' started by Rodney12, Oct 13, 2008.

  1. Rodney12

    Rodney12 LawnSite Member
    Messages: 29

    I am not getting a very good stripe out of my turf tracer, got the height around 3 1/4. should the deck be level or slightly offset the front or back? I have seen these mower and they stripe great, just not sure why mine isnt. Im running gator blades on it with a single wheel sulky. any recommendations?
  2. C.T. Lawn Care

    C.T. Lawn Care LawnSite Senior Member
    Messages: 252

    switch your blades to high lift and you should see improvement.
  3. thu cutting edge

    thu cutting edge LawnSite Senior Member
    Messages: 279

    try off setting the back of the deck so it will help stripe
  4. Rodney12

    Rodney12 LawnSite Member
    Messages: 29

    thanks for the feedback. do you mean lower the back of the deck?
  5. dura to the max

    dura to the max LawnSite Silver Member
    from georgia
    Messages: 2,246

    use highlifts and get a proslide sulky or a stripe kit.
  6. bakerc8

    bakerc8 LawnSite Member
    Messages: 214

    get a stripe kit or go to the dealer

Share This Page