5x10 trailer

Discussion in 'Trucks and Trailers' started by deerewashed, Aug 2, 2009.

  1. deerewashed

    deerewashed LawnSite Senior Member
    Messages: 883

    can i fit 2 bobcat gear drive walks on a 5x10 trailer or do i need a 7x12 (the next step availible) for 600 more with a side ramp.
  2. luis@NJ

    luis@NJ LawnSite Senior Member
    Messages: 291

    Why not get a 6x12?
  3. 93Chevy

    93Chevy LawnSite Fanatic
    Messages: 38,379

    Get out a tape measure and figure it out yourself.

    Not trying to be rude, but that's the only way you'll get a definite answer.

    And check into used trailers, I got a 16' that needs a little work for $500. There are deals out there.
  4. Puddle of Oil

    Puddle of Oil LawnSite Bronze Member
    Messages: 1,202

    ya, it will be close but it will work! to be safe go with the 12'!
  5. deerewashed

    deerewashed LawnSite Senior Member
    Messages: 883

    i would measure it but only own 1 right now that i use i am getting another 36 or 48 bobcat so dont own it yet.
  6. 93Chevy

    93Chevy LawnSite Fanatic
    Messages: 38,379

    Then double the length...

    STIHL GUY LawnSite Fanatic
    from CT
    Messages: 5,226

    i have a 48'' bobcat and i could probably fit 2 on my 10ft trailer if i put them on backwards so the controls are not hanging where the gate needs to be. get a 6X12 just to be safe. youll grow into it quick
  8. South Florida Lawns

    South Florida Lawns LawnSite Platinum Member
    from usa
    Messages: 4,784

    Here's what I do, find a flat floor and take a chalk line and tape measure and make a rectangle on the floor. Do it the same size as the trailers your looking at. Next park your two mowers in the space and see how the stuff fits.

    BJWLAWNCARE LawnSite Senior Member
    Messages: 596

    the tighter the better. If my stuff slides around it usually breaks something. I use to fit a Ramsomes 48 belt driven a scag 48 belt driven and a 21 turned sideways. 5 x 10

Share This Page