1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

8' nozzles for 5' strip?

Discussion in 'Irrigation' started by jcom, Sep 1, 2005.

  1. jcom

    jcom LawnSite Senior Member
    Messages: 791

    I have run into a 5' x 37 foor strip and 5' by 68' strips. I was going to use 8' nozzles and turn down the radius. An awful lot of heads.

    Any experience trying to use a 15' SST by RB which in theory will only go 4'?

    Hunter has a 5SST that in theory will go 5' out. Either of these options would cut down on the heads considerably.

    Working with 60psi.


    John
     
  2. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Messages: 50,267

    Hunter should work fine, and they make 5x15 corner nozzles, so you can space them head-to-head if you want.
     
  3. jcom

    jcom LawnSite Senior Member
    Messages: 791

    Thanks WB. What a plethora of info u r.

    John :blob3:
     
  4. Dirty Water

    Dirty Water LawnSite Fanatic
    Messages: 6,794

    RB 9 SST's and 15SST's work excellent in that application
     

Share This Page