97 to 2000 plow conversion

Discussion in '<a href=http://www.plowsite.com target=_blank ?>Sn' started by fjs, Aug 26, 2000.

  1. fjs

    fjs LawnSite Member
    Messages: 2

    Iam changing my plow from my 96 1/2 ton to a 2000 1/2ton chevy pickup.
    What will I need to change new frame for truck?
    Complete light harness or can old harness be used?
  2. Alan

    Alan Member
    Messages: 1,185

    Best bet is to go to your plow dealer for that information, yer gonna end up there for parts anyhow.
  3. fjs

    fjs LawnSite Member
    Messages: 2

    I called three dealers two said need new lights and harness
    costing around $250.00

    one said only needed adapter plug at about $60

    also e-mailed meyers who said I would need new lights and harness

    just trying to find out why new lights and harness are needed.

    is there some new light system that doesn"t use a hot wire and a ground to power it ?

    maybe it is thermo-nuclear powered.(ha-ha)

    appreciate any one who could provide insight.


  4. plowking35

    plowking35 LawnSite Bronze Member
    from S.E. CT
    Messages: 1,687

    If you have a 2000 silverado you will need a new sub frame, and my bet is a new light harness. They have changed the DRL from 96-2000 and the new harness needs that upgrade.
    Check with Bill Nero from CPW and he will set you up. I believe he said truck side changeover (sub frameand harness) runs about $ 500-600.

Share This Page