1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Accelerator Catcher and Exmark

Discussion in 'Lawn Mowing' started by stemmy, Aug 7, 2008.

  1. stemmy

    stemmy LawnSite Member
    from PA
    Messages: 6

    Fellas,

    I have a 48" exmark metro(04) and I was thinking of getting an Accelerator catcher for it....and I have a couple of questions...

    1. Does it require a bracket to mount the catcher?
    2. If so, is a difficult job?
    3. Will I need to remove my ezchute?

    thanks in advance for your responses........ (and before you tell me to contact accelerator industries...they are on vacation until 8/11)

    Stemmy
     
  2. sandman23

    sandman23 LawnSite Member
    from GA
    Messages: 212

    No, you do not need any brackets. Just make sure to order the correct cather for your model. The Accelerator has a pin that sticks in a hole around the discharge. The catcher then pivots downard and hooks onto the top of the descharge chute. Very easy to put on and take off. Also very light.

    You will probably have to remove ez chute. You may be able to modify it somehow.

    I am very satisfied with Accelerator products and support.
     
  3. stemmy

    stemmy LawnSite Member
    from PA
    Messages: 6

    ............nm
     

Share This Page