Lawn Care Forum banner

Aluminum dump body pics / manufacture options

3K views 5 replies 2 participants last post by  BJWLAWNCARE 
#1 ·
One of the larger companies around here uses F350's with manufactured aluminum dump bodies on the back for their grass clippings. I called them and asked who manufactures them. They said they would have their equipment guy call me back. I doubt that will happen.

The walls on these things look fairly flimsy but they are only using these trucks for grass clippings so it probably works fine. I am wondering if any of you use a "less beefy" aluminum dump bed body and if you have any advice or pictures I could take a look at for research. Steel bodies are heavy and like $10,000. Also looking for manufactures of such dump beds.

Any advice, experience, or input is appreciated. Thank you.
 
#2 ·
Wheel Tire Sky Vehicle Plant


Magnum 12 foot dump body with a side door. The best choice for me. Light strong and no paint ever needed. Zero dents after more than three years of work. I put stone in it up to 3B in size. I love it.

13k installed with a back up camera and tarp
 
  • Like
Reactions: hort101 and River
#3 ·
Double post sry
 
#5 ·
It's magnum landscape body.

Google magnum dump body or powells has a link for them on their site.

Powells in justus pa installed it.

Steel was close to 10k.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top