Another New Walker Mod: Lights!

Blainethompson

LawnSite Senior Member
Location
San Angelo, Tx
Well got the new lights installed. For night mowing or night tanning. 20,000 lumens:cool2:

Funny part, had a power outage due to wind storm about 20 minutes before I finished the wiring. Sign from lawn mower gods? Pulled the battery powered tri pod light out, finished up, and dom dom dom!!!!

0F9A3785-8B54-4F72-AA3E-27D435EA7907.jpeg


31F2CA4B-27EA-4817-B816-EFB653986254.jpeg


E5AF7E93-4E64-4B0F-BB99-412B042C70F5.jpeg


89364280-D546-4781-9CFE-FAA346C70AFD.jpeg


3577B836-3588-4383-923A-F28D8963350C.jpeg
 

hort101

LawnSite Fanatic
Location
S.E. New England
OP
Blainethompson

Blainethompson

LawnSite Senior Member
Location
San Angelo, Tx
When are going to add the coaxial contra-rotating rotors?
Next week after I add the flux capacitor. I have to have something to power it first. :dancing:
 
OP
Blainethompson

Blainethompson

LawnSite Senior Member
Location
San Angelo, Tx
Wondered if you could show how you mounted your lamps, your wiring routing & how you allowed for the hinge-action, so not to pull on the wires.
I’ll have to get pics. But they go inside the hopper and run down the tube with the other wires
 
OP
Blainethompson

Blainethompson

LawnSite Senior Member
Location
San Angelo, Tx
Wondered if you could show how you mounted your lamps, your wiring routing & how you allowed for the hinge-action, so not to pull on the wires.
And the mounts are a piece of 2x3x 3/16 think aluminum angle
 
Top