Another nutty question...

Discussion in 'eXmark' started by pryker, May 15, 2004.

  1. pryker

    pryker LawnSite Member
    Messages: 56


    It is me again! The newbie... :) This is probably a REALLY bad question but: If I set the cutting height to 3.5 inches on the mower adjustment control does it really cut at 3.5 inches? Or is this actual height from bottom of wheels. Do I need to set it at 4 inches for 3.5 to make up for the weight of the mower, etc...?


  2. eXmark

    eXmark Manufacturer / Sponsor
    Messages: 4,258


    If you set the cutting height at 3.5" then the blade tip should be 3.5" off the ground when the mower is sitting on a solid flat surface.



Share This Page