Hello again...I've got a well that is 35' deep, water level is at 8'. 50' of suction line-pump had lost its prime-did the old "twist" test and the pipes about fell off. I replaced both the suction and discharge @ the pump and replaced brass check valve near the well. The 1.5 hp pump holds the prime in the 50' of suction line, but then loses prime after all that water passes out the hose bib. I can reprime it and get it going, but I am only getting about 15 gpm and the rotors won't turn. If it is off more than a day, then the prime is lost shortly after the pump comes on. Sound like a bad well?