Lawn Care Forum banner

Any hints for finding shorted valves?

11K views 55 replies 20 participants last post by  jimmyburg 
#1 ·
One of my guys is at a customer that has a valve reading .3 Ohms and he's having trouble finding it. He's found every other valve on the site. I told him to go slow and that he's probably going to just lose the signal when he gets over it instead of it screaming at him and suggested he run a tracer wire down the lateral line to see if he can get to it that way. Anybody got any other suggestions besides poke, poke?

Thanks.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top