anyone kno anything about photoshop with logos

Discussion in 'Business Operations' started by WrightWay05, May 12, 2009.

  1. WrightWay05

    WrightWay05 LawnSite Member
    Messages: 49

    ok so i have a logo and its always worked with anything that i wanted to get made but i was having some signs for the truck made and they said i need to have it "flattened" its in pdf format, does anyone kno how to do this cause i would really hate for this little problem to keep my from getting im signs.
  2. bohiaa

    bohiaa LawnSite Fanatic
    Messages: 5,220

    sounds like you need a file converter.

    I used photoshop in the old days, and I dont theink it can be done. inside photoshop.

    look around and see if there is a converter.

    best of luck
  3. benjammin

    benjammin LawnSite Senior Member
    Messages: 251

    No need for photo shop.
    Open image in Adobe.
    Click "Save As"
    Select file type ".jpg"
  4. JDUtah

    JDUtah LawnSite Silver Member
    from UT
    Messages: 2,636

    If you have photoshop just save it as a jpg... or click layers, flatten image (but save it as a different image or you will loose some important editing capabilities)...

    I would be weary of hiring a printer that needs you to do this... they should have the software to do it themselves... make sure they do good work before you buy.
  5. WrightWay05

    WrightWay05 LawnSite Member
    Messages: 49

    thanks for ur replies, but i found the email of the lady that made my logo and see did it for me with no problems, and it was vistaprint that needed me to do it, im not sure why they have never asked me to do it before for any of the other items ive ordered with my logo in them but they needed it that way for the signs...

    LBLC_LCO LawnSite Senior Member
    Messages: 402

    If you are planning on getting magnetic signs from vistaprint, you should check out The vistaprint ones are really thin and cheap, heard some guys had them fly off their trucks. I got some from buildasign and they are really good quality. I paid $60 or so for 2 signs with 3 colors.
  7. Joe Shooner

    Joe Shooner LawnSite Member
    Messages: 170

    I'd also be wary. Most of the time you want to give a printer "vector" artwork, which is usually an .eps file for logos. With a pdf/jpg, you're never going to have more pixels than you do when you convert it. So if you give them a 3" x 3" PDF and they try to print a 12" x 12" sign, you're going to have a really jagged, pixelated logo. An eps, on the other hand, is scalable.

Share This Page