1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

anyone know a durable biodeg. paper lawn bag holder/stand?

Discussion in 'Lawn Mowing' started by lawncuttinfoo, Jun 16, 2011.

  1. lawncuttinfoo

    lawncuttinfoo LawnSite Bronze Member
    Messages: 1,010

    Looking for a quality paper bag holder to load clippings into. All I have found are the flimsy ones.
    I need it to be freestanding and the edge to be able to hold the ~30 lb bagger as the clippings are folded in.
  2. ALC-GregH

    ALC-GregH LawnSite Fanatic
    from PA
    Messages: 7,051

    If you're crafty with a welder, you could make one easily.
  3. lawncuttinfoo

    lawncuttinfoo LawnSite Bronze Member
    Messages: 1,010

    I do not have a welder, the skills to use one, or the time to make it.
    Also, I want to be able to get a replacement fast if I need to. So having someone else make it is out.
    Needs to be a mass market item.
  4. Roger

    Roger LawnSite Fanatic
    Messages: 5,943

    Last Fall, I saw some homeowners in my area using cardboard shells to hold the paper bags. In my area, no burning of leaves, so those not mulched are bagged into paper bags, put to the curb for recycle into a compost pile.

    The shell was a simple cardboard one that folded flat when not in use. It is opened, the paper bag inserted, and when full, the shell is pulled out over the top, leaving the full bag standing.

    I have also seen plastic shells that are slightly tapered, wider at the bottom. The top is an opening that is covered with a large funnel. The two pieces are separate. When filling, the funnel is atop, when the bag is full, the funnel taken off, the shell is lift out over top. Local hardware stores were carrying these in the Fall. This can be used for both paper, or plastic, bags.

Share This Page