1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Anyone Know How....

Discussion in 'Mechanic and Repair' started by MCS Lawn Care, Dec 17, 2003.

  1. MCS Lawn Care

    MCS Lawn Care LawnSite Member
    Messages: 46

    hi guys i just got a used 60 inch dixie chopper? does anyone know how to even the handles, it seems that the two are a little off from each other(the left one engages prior to the right) which is no bug deal just a little annoying..............


    chris
     
  2. MCS Lawn Care

    MCS Lawn Care LawnSite Member
    Messages: 46

  3. Doc Pete

    Doc Pete LawnSite Gold Member
    Messages: 3,469

    I'm sure Larry at "Hillsboro lawn and garden", in Hillsboro could help you. The handle/handled Dixies.
    Pete
     
  4. PLI1

    PLI1 LawnSite Senior Member
    Messages: 254

    check to make sure one of the handles isn't bent.
     
  5. Pecker

    Pecker LawnSite Bronze Member
    Messages: 1,454

    I know nothing about D/C's, but my JD 757 ztr has two bolts at the bottom of the yokes you can loosen. Then you just set them where you want 'em and hold it while you tighten it back up. If there are no similar bolts on your, you might be able to adjust the linkages going to the pumps. Hope this helps.
     
  6. MCS Lawn Care

    MCS Lawn Care LawnSite Member
    Messages: 46

    thank you for all the help too cold to check now will do when it gets warmer.


    chris
     
  7. BW4486

    BW4486 LawnSite Member
    Messages: 243

    if you lift the seat im pretty theres 2 screws on the hydro pump u can adjust
     
  8. BW4486

    BW4486 LawnSite Member
    Messages: 243

    IF you lift the seat im pretty (sure) theres 2.......
     

Share This Page