Armature Growler

Discussion in 'Mechanic and Repair' started by fixer67, Jul 10, 2004.

  1. fixer67

    fixer67 LawnSite Silver Member
    Messages: 2,098

    I have been thanking on getting a Growler to test armatures with. Has any one used one that could tell me about them.

    Attached Files:

    • 6054.pdf
      File size:
      25.7 KB
  2. rockytopp

    rockytopp LawnSite Member
    Messages: 120

    I have't used one for a spell but if they have not changed, just place the armature in the V of the electro magnets, turn on and gently take a lite thin piece of flat metal, (I used a hacksaw blade with teeth ground off) and slide it over the comutator, if it does not pull to the magnet, all should be fine. clean the comutater, and groves and new brushes should make it like new, of course check all connections and the fields for crackes, bare wires and the usuall things that come with a complete redo.
  3. sawman65

    sawman65 LawnSite Senior Member
    Messages: 754

    i have one use it all the time never been wrong

Share This Page